How to Take Apart a Door on a 2002 Subaru WRX

Are you having trouble with your 2002 Subaru WRX door? Maybe the window won’t roll up or down, or the door lock isn’t working properly. Whatever the issue, taking apart the door can help you identify and fix the problem. In this article, we will show you step-by-step how to take apart the door on your 2002 Subaru WRX.

Key Takeaways

Before we get started, here are some key takeaways to keep in mind:

  • Taking apart a door on a 2002 Subaru WRX can be a bit complicated, so it’s important to take your time and follow the steps carefully.
  • You will need a few tools, including a screwdriver, a panel removal tool, and possibly a drill.
  • It’s a good idea to have someone help you, especially when it comes to removing and replacing the door panel.

Now, let’s get started!

Step 1: Gather Your Tools

Before you begin, make sure you have all the necessary tools. You will need:

  • Screwdriver (Phillips and flathead)
  • Panel removal tool
  • Drill (if necessary)
  • Pliers (if necessary)

Step 2: Remove the Door Handle Cover

The first step to taking apart a door on a 2002 Subaru WRX is to remove the door handle cover. Start by using a flathead screwdriver to pry off the cover. Once the cover is off, you should be able to access the door handle screws.

See also  DIY Guide: How to Remove Door Card in Your 2002 Subaru WRX

Step 3: Remove the Door Handle Screws

Using a Phillips screwdriver, remove the two screws located on the door handle. Once the screws are removed, you should be able to pull the handle out slightly. Be careful not to pull too hard, as there may still be some clips holding the handle in place.

Step 4: Remove the Door Panel Screws

Next, you need to remove the screws that hold the door panel in place. There are usually three screws located near the bottom of the panel, and one near the top. Use a Phillips screwdriver to remove these screws.

Step 5: Remove the Door Panel

Once the screws are removed, it’s time to remove the door panel. Start by using a panel removal tool to pry the panel away from the door. Work your way around the panel, gently prying it away from the door. Be careful not to damage any of the clips that hold the panel in place.

Step 6: Disconnect the Wiring

Once the panel is off, you will need to disconnect the wiring. There may be several wires attached to the panel, so take your time and make sure you disconnect them all. You may need to use a pair of pliers to remove stubborn connectors.

Step 7: Remove the Door Speaker

If you need to access the window regulator or the door lock actuator, you will need to remove the door speaker. Use a Phillips screwdriver to remove the screws holding the speaker in place. Once the screws are removed, gently pull the speaker away from the door.

See also  When Will 2022 Subaru WRX Be Available?

Step 8: Remove the Plastic Cover

Underneath the door panel, you will find a plastic cover. This cover is held in place by several screws. Use a Phillips screwdriver to remove these screws and remove the plastic cover.

Step 9: Access the Window Regulator or Door Lock Actuator

With the plastic cover removed, you should be able to access the window regulator or door lock actuator. Use a drill to remove any rivets holding the regulator or actuator in place. Once the rivets are removed, you should be able to pull the regulator or actuator out of the door.

Step 10: Reassemble the Door

Once you have fixed the problem, it’s time to reassemble the door. Start by reattaching the window regulator or door lock actuator. Then, replace the plastic cover and screw it back in place. Next, reconnect the wiring and replace the door panel. Finally, replace the door handle screws and cover.

Congratulations! You have successfully taken apart the door on your 2002 Subaru WRX.

FAQs

Q: Do I need to disconnect the battery before taking apart the door?

A: It’s always a good idea to disconnect the battery before working on any electrical components.

Q: How long does it take to take apart a door on a 2002 Subaru WRX?

A: It can take anywhere from 30 minutes to an hour, depending on your level of experience.

Q: Can I take apart the door myself, or do I need to take it to a professional?

A: You can take apart the door yourself, but it’s important to follow the steps carefully and take your time. If you’re not comfortable working on your car, it’s always best to take it to a professional.

See also  How Much Are Motor Mounts for 2005 Subaru WRX?

Conclusion

Taking apart a door on a 2002 Subaru WRX can be a bit intimidating, but with the right tools and a little patience, it’s a manageable task. By following the steps outlined in this article, you can identify and fix any issues with your door. Just remember to take your time, be careful not to damage any of the clips or connectors, and stay safe!

Avatar photo

Joseph Weaver

With a background in engineering and a passion for cars, Joseph brings a unique perspective to our blog. He's particularly interested in the technology and innovation behind Subaru's advanced safety features, and his articles on this topic are always insightful and informative. When he's not writing, he enjoys playing video games and spending time with his family.

Recommended Articles