Ultimate Guide to Programming Homelink in Your Subaru: Step-by-step Instructions and Expert Tips

Are you tired of fumbling with your garage door opener every time you come home? Do you want to streamline your home access with your Subaru car? Look no further than Subaru’s Homelink system! By programming your Homelink, you can easily open gates, doors, and garages with just a click of a button within your car. In this ultimate guide, we will provide step-by-step instructions and expert tips to help you program Homelink in your Subaru car.

Introduction to the Homelink System

The Homelink system serves as a universal wireless control system that allows you to operate your garage door opener, gate operator, and home lighting. Essentially, instead of carrying around a separate remote for your garage, you can integrate Homelink into your car for convenience and ease of use. Subaru vehicles equipped with the Homelink system have three buttons located on the car’s overhead console that can be programmed to open and close your garage door or gate.

Benefits of Programming the Homelink System

Not only can programming Homelink in your Subaru car save you valuable time and hassle, but it also provides added security and convenience. By eliminating the need for a separate remote, you decrease the risk of someone gaining access to your home via your remote, and you won’t have to worry about losing your remote. Moreover, many Homelink-compatible products allow for scheduling and timed control, which makes your home even more secure.

See also  Does My Subaru Have RAB? Learn All About Subaru's Anti-Roll Bar, Its Benefits, and How to Troubleshoot It

Step-by-Step Process to Program Homelink in a Subaru

Programming your Homelink in a Subaru is easier than you think! Follow these simple steps to program your Homelink in minutes:

  1. Gather Your Equipment: You will need a Homelink-compatible remote, a ladder, and a person to help you.
  2. Clear the Homelink System: Clear any existing codes from Homelink by holding down the first and third buttons simultaneously for approximately 20 seconds until the light starts to flash.
  3. Prepare Your Garage Door Opener: Consult your garage door opener manual to locate the "learn" button. Press and release the "learn" button and return to your car.
  4. Program Your Homelink: Hold the Homelink button you want to program until the light starts to flash slowly. Press the programmed remote and then the Homelink button until the light on the Homelink system flashes rapidly.
  5. Test the Homelink System: Test the Homelink by pushing the programmed button. Make sure your garage door or gate opens and closes smoothly and consistently.
  6. Repeat Steps for Additional Devices: If you have multiple devices to program, simply repeat the process for each device with a separate Homelink button.

Common Issues Faced While Programming Homelink and their Solutions

While programming Homelink in a Subaru is a relatively easy process, there are some common issues that you may encounter. Here are some of the most common problems when programming Homelink and the solutions to help you overcome them:

  • Issue: Homelink won’t accept the code or times out.
    Solution: Make sure that you are close enough to the garage door opener and that you press and hold the button until the light flashes slowly.
  • Issue: The door opens but doesn’t close.
    Solution: Check the safety sensors to see if they are aligned correctly. If not, adjust them until they’re facing each other correctly.
  • Issue: The Homelink system only works intermittently.
    Solution: Check the battery of the remote and replace it if necessary.
See also  DIY Guide: How to Change Automatic Transmission Fluid in Your Subaru - Improve Performance and Extend Transmission Life

Tips to Ensure Successful Programming of Homelink

To ensure a successful programming experience with Homelink, we’ve collected a few tips and tricks to help you along the way:

  • Follow the instructions carefully and double-check your work before testing.
  • Always test the Homelink system out before assuming it is programed correctly.
  • Consult the garage door opener manual or contact the manufacturer directly if you are unsure of how to clear codes or program your device.
  • Make sure the remote you are using is Homelink-compatible.


Q: Is Homelink available in all Subaru cars?
A: No, only select Subaru models are equipped with the Homelink system.

Q: Can I program Homelink if I don’t have a compatible remote?
A: No, you must have a Homelink-compatible remote to program Homelink in your Subaru car.

Q: Will programming Homelink in a Subaru affect my garage door opener’s security?
A: No, programming Homelink in your Subaru car does not affect the security of your garage door opener.

Programming Homelink in your Subaru car is a great convenience that saves you time and energy. With our ultimate guide to programming Homelink, you can easily program your Homelink system in no time and with ease. Remember to follow the steps, troubleshoot common issues, and use our tips and tricks to ensure a successful programming experience. Happy programming!

Avatar photo

Peter Banks

With years of experience as a professional mechanic and Subaru specialist, Peter is one of the most respected members of our team. He's written several articles on Subaru maintenance and repair, and his advice and tips are always practical and helpful. When he's not working on cars, he enjoys cooking and trying out new recipes.

Recommended Articles