Billy Covington If your Subaru rear view mirror has fallen off or become loose, it can be a major safety hazard while driving. While it may seem like a daunting task, reattaching the mirror is actually a simple process that can be done at home. In this guide, we’ll walk you through the step-by-step process to reattach your Subaru rear view mirror and get you back on the road safely.
Key Takeaways
- A loose or fallen off rear view mirror can impede your view while driving and is a major safety hazard.
- Reattaching the mirror is a simple process that can be done at home with minimal tools.
- It’s important to clean the windshield and mirror base thoroughly before reattaching the mirror to ensure a secure hold.
Supplies Needed
Before we get started, here are the supplies you’ll need to reattach your Subaru rear view mirror:
- Rubbing alcohol
- Clean cloth
- Rear view mirror adhesive kit
- Razor blade or box cutter (optional)
Step-by-Step Guide
Follow these simple steps to reattach your Subaru rear view mirror:
Step 1: Clean the Windshield and Mirror Base
Before you begin reattaching your rear view mirror, it’s important to clean the windshield and mirror base thoroughly. Use rubbing alcohol and a clean cloth to remove any dirt, oil, or residue from both surfaces. This will ensure a secure hold for the mirror.
Step 2: Prepare the Rear View Mirror Adhesive
Next, you’ll need to prepare the rear view mirror adhesive. Most rear view mirror adhesive kits come with two parts: a primer and an adhesive. Follow the instructions included in your kit to mix the two components together.
Step 3: Apply the Adhesive to the Mirror Base
Using the applicator included in your kit, apply a small amount of adhesive to the mirror base. Be sure to apply it evenly and in a thin layer.
Step 4: Attach the Mirror to the Windshield
Carefully position the mirror onto the windshield at the desired location. Press down firmly on the mirror and hold it in place for at least 30 seconds to ensure a secure hold.
Step 5: Let the Adhesive Dry
Allow the adhesive to dry completely according to the instructions included in your kit. This may take several hours, so be sure to leave the mirror untouched during this time.
Step 6: Adjust the Mirror
Once the adhesive has fully dried, you can adjust the mirror to your desired position.
Congratulations, you have successfully reattached your Subaru rear view mirror!
FAQ
How long does the adhesive take to dry?
The drying time for rear view mirror adhesive can vary depending on the brand and type of adhesive. Refer to the instructions included in your kit for specific drying times.
What if the mirror base is damaged?
If the mirror base is damaged, it may need to be replaced. Contact your local Subaru dealership or auto parts store to find a replacement base.
Can I use super glue instead of rear view mirror adhesive?
No, super glue is not recommended for reattaching your Subaru rear view mirror. Rear view mirror adhesive is specifically designed for this purpose and provides a secure hold without damaging the windshield or mirror base.
Conclusion
Reattaching your Subaru rear view mirror may seem like a daunting task, but with the right supplies and a little patience, it’s a simple process that can be done at home. Remember to clean the windshield and mirror base thoroughly before applying the adhesive, and allow the adhesive to dry completely before adjusting the mirror. By following these steps, you’ll be back on the road safely in no time.
