Peter Banks If you own a 2006 Subaru and are looking to program a new key fob, you have come to the right place. Programming a new key fob for your car can be a daunting task, but it is not impossible. In this comprehensive guide, we will walk you through the step-by-step process of programming a key fob for your 2006 Subaru. By the end of this guide, you will have a working key fob that will allow you to unlock, lock, and start your car with ease.
Key Takeaways
- Programming a key fob for your 2006 Subaru requires you to have a new key fob and your car’s master key.
- You can program a new key fob for your 2006 Subaru by following a series of steps that involve turning the ignition on and off, pressing buttons on the key fob, and using the master key to confirm programming.
- It is important to follow the instructions carefully and within the given time frames to ensure successful programming.
Step-by-Step Guide to Programming a Key Fob for 2006 Subaru
Before we begin, it is important to note that this guide is specifically for programming a key fob for the 2006 Subaru model. The process may differ for other models or years. Additionally, you will need a new key fob and your car’s master key to complete the programming process.
Now, let’s get started.
Step 1: Sit in the Driver’s Seat
To begin programming your new key fob, sit in the driver’s seat of your 2006 Subaru and close all the doors.
Step 2: Insert Your Master Key
Insert your master key into the ignition and turn it to the "On" position. Do not start the engine.
Step 3: Press and Release the "Lock" and "Unlock" Buttons
On your new key fob, press and release the "Lock" and "Unlock" buttons simultaneously. You should do this quickly, within five seconds of inserting the master key.
Step 4: Turn the Ignition Off
Turn the ignition off and remove the master key from the ignition.
Step 5: Press and Release the "Lock" and "Unlock" Buttons Again
Within five seconds of turning the ignition off, press and release the "Lock" and "Unlock" buttons on your new key fob again.
Step 6: Wait for the Confirmation
After pressing the buttons on your new key fob, wait for the confirmation. This should take no longer than 30 seconds. You will know the programming is successful when the remote control door lock receiver makes a sound and the door locks cycle.
Step 7: Repeat the Process for Additional Key Fobs
If you have more than one key fob to program, repeat the process starting from Step 3 for each additional key fob.
Step 8: Test Your New Key Fob
After programming your new key fob, test it out. Press the "Lock" and "Unlock" buttons to ensure they are working properly. You should also try starting the engine with the new key fob.
Congratulations! You have successfully programmed a new key fob for your 2006 Subaru.
Frequently Asked Questions
Q: How many key fobs can I program to my 2006 Subaru?
A: You can program up to four key fobs to your 2006 Subaru.
Q: What do I do if the programming process doesn’t work?
A: If the programming process doesn’t work, ensure that you are following the steps within the given time frames. If this still doesn’t work, consult your car’s manual or take it to a certified Subaru technician.
Q: Can I program a key fob for my 2006 Subaru myself?
A: Yes, you can program a key fob for your 2006 Subaru yourself as long as you have a new key fob and your car’s master key.
Q: Do I need to go to a dealership to program a key fob for my 2006 Subaru?
A: No, you do not need to go to a dealership to program a key fob for your 2006 Subaru as long as you have a new key fob and your car’s master key.
Conclusion
Programming a key fob for your 2006 Subaru can seem like a daunting task, but it is not impossible. By following the steps outlined in this comprehensive guide, you can program a new key fob for your car with ease. Remember to follow the instructions carefully and within the given time frames to ensure successful programming.
