Joseph Weaver If you own a 2012 Subaru and you have accidentally bumped into something, you may find that your bumper has popped out of place. While this may seem like a daunting task to fix, it can actually be quite simple with the right tools and techniques. In this article, we will guide you through the steps you need to take to pop your 2012 Subaru bumper back in place.
Key Takeaways
- Popping back in a 2012 Subaru bumper can be quite simple with the right tools and techniques.
- The tools you will need include a heat gun, a plastic spatula, a rubber mallet, and a pair of gloves.
- Before starting, make sure to clean the area around the bumper to avoid any damage or scratches.
- Be patient and take your time to ensure the bumper is properly aligned before securing it back in place.
Tools You Will Need
Before you begin, you will need to gather the following tools:
- Heat gun
- Plastic spatula
- Rubber mallet
- Gloves
Step-by-Step Guide
Follow the steps below to pop back in your 2012 Subaru bumper:
- Clean the area around the bumper. Before starting, make sure to clean the area around the bumper to avoid any damage or scratches. Use a non-abrasive cleaner and a soft cloth to gently wipe away any dirt or debris.
- Heat the bumper. Use a heat gun to heat up the area around the bumper that has popped out of place. Hold the heat gun about 6 inches away from the bumper and move it back and forth over the area for about 2 minutes. This will soften the plastic and make it more pliable.
- Use a plastic spatula to push the bumper back in place. Put on a pair of gloves to protect your hands and use a plastic spatula to gently push the bumper back into place. Be careful not to scratch the paint or damage any other parts of the car.
- Tap the bumper with a rubber mallet. Once the bumper is back in place, use a rubber mallet to gently tap the bumper to ensure that it is securely in place.
- Check the alignment. Step back and check the alignment of the bumper. If it is not properly aligned, you may need to repeat the previous steps until it is in place.
FAQ
What if the bumper still won’t pop back in place?
If the bumper still won’t pop back in place, it may be bent or damaged. In this case, it may be best to take your car to a professional to have it repaired.
Is it safe to use a heat gun on my car’s bumper?
Yes, it is safe to use a heat gun on your car’s bumper as long as you take the necessary precautions. Make sure to hold the heat gun at least 6 inches away from the bumper and move it back and forth slowly to avoid overheating any one area.
How can I prevent my bumper from popping out of place in the future?
To prevent your bumper from popping out of place in the future, be sure to drive carefully and avoid bumping into things. Additionally, you may want to invest in a bumper guard or bumper protector to provide an extra layer of protection for your car’s bumper.
Conclusion
Popping back in a 2012 Subaru bumper may seem like a daunting task, but with the right tools and techniques, it can be a simple fix. Remember to take your time, be patient, and ensure that the bumper is properly aligned before securing it back in place. Follow the steps outlined in this article, and you’ll be able to pop back in your bumper in no time.
