How to Mount a Subaru Engine on an Engine Stand: The Ultimate Guide for Car Enthusiasts

Working on car engines can be a fun and rewarding experience for those who are willing to put in the time and effort. However, before diving in, it’s essential to understand the proper steps to take and the tools you’ll need. In this article, we’ll take a closer look at how to mount a Subaru engine onto an engine stand – a crucial step in preparing for any engine work.


This article is geared towards car enthusiasts with an interest in working on Subaru engines. They may have some experience in engine work, but could also be new to the subject and looking to learn more.

Level of knowledge

The audience for this article may have a basic understanding of how to put an engine on an engine stand but may not be familiar with the specifics of working with a Subaru engine.

How to mount a Subaru engine on an engine stand

Mounting a Subaru engine onto an engine stand is a relatively straightforward process. However, there are some crucial steps you must follow to ensure the engine is properly secured:

  1. Begin by disconnecting the battery and any electrical connectors or hoses connected to the engine. It’s also advisable to remove the spark plugs to make the engine lighter and easier to work with.

  2. Locate the engine mount points on the sides of the engine. Use eye bolts or chains to attach the engine to the stand, being careful not to damage any of the engine components in the process.

  3. It’s important to ensure that the engine stand is secure and stable before attaching the engine. Make sure to tighten all bolts and connections before proceeding.

  4. Once the engine is mounted on the stand, rotate the engine to a suitable working position. It’s a good idea to position the engine so that the top-side faces upwards, allowing easy access to all components.

See also  The Ultimate Guide to Taking Apart Your Subaru Key Fob: Tips and Tricks for Troubleshooting and Repair

Working on a Subaru engine

Now that the engine is properly mounted on the stand, you can begin to work on it. Here are some essential steps when working with a Subaru engine:

Removing the intake manifold:

The intake manifold is a critical component of the engine that distributes air/fuel to the cylinders. While it is not always necessary to remove it, doing so can make it easier to work on the engine:

  1. Begin by removing any hoses and connectors connected to the intake manifold, as well as any electrical connections.

  2. Unscrew the clamps that hold the manifold in place, remembering to keep nuts and bolts organized for easy reassembly.

  3. Once removed, inspect the manifold for any signs of cracks or other damage. If any issues are found, it may be necessary to replace the manifold.

Timing belt:

The timing belt is another crucial component of the engine responsible for keeping the internal components in sync. It’s essential to handle it with care to avoid any damage to the engine during maintenance:

  1. Remove the timing belt cover to access the timing belt.

  2. Check the tension of the belt and inspect it for any signs of wear or damage.

  3. Replace the timing belt if it is found to be worn or damaged, taking care to avoid any damage to the engine’s internal components.


Q: Is it necessary to remove the intake manifold when working on a Subaru engine?
A: While it’s not always necessary, removing the intake manifold can make it easier to access and work on the engine.

See also  What Does SPT Stand for in Subaru?

Q: How do I ensure the engine stand is secure before mounting the engine?
A: Ensure that the stand is level, all bolts and fastenings are tightened, and the stand is rated for the weight of the engine.


Mounting a Subaru engine onto an engine stand is a crucial step in preparing for any engine work. By following the steps outlined above, you can ensure that your engine is properly secured and ready for work. Working on a Subaru engine can be a rewarding experience, but it’s essential to handle any maintenance work with care and precision.

Avatar photo

Billy Covington

With a passion for all things automotive, Billy is our go-to expert on Subaru performance upgrades and modifications. He's been featured in several car magazines and blogs, and his extensive knowledge and expertise make him a valuable member of our team. When he's not working on cars, he enjoys playing guitar and writing music.

Recommended Articles