Joseph Weaver If you’re a proud Subaru owner and you’re looking for a way to link your car’s Homelink system to your garage door opener, then you’ve come to the right place. In this article, we’ll provide a step-by-step guide on how to link your Subaru to your garage door opener.
Key Takeaways
Before we dive into the step-by-step instructions, here are some key takeaways that you should keep in mind when linking your Subaru to your garage door opener:
- Make sure that your garage door opener is compatible with Subaru’s Homelink system.
- Most garage door opener brands have their own set of instructions for linking with Homelink, so it’s a good idea to consult your garage door opener’s manual before proceeding.
- If you encounter any issues during the linking process, refer to the troubleshooting section in your Subaru owner’s manual.
Step-by-Step Instructions
Now that you have an idea of what to expect, let’s proceed with the step-by-step instructions on how to link your Subaru to your garage door opener.
Step 1: Clear the Homelink System
The first thing you need to do is clear the Homelink system in your Subaru. To do this, press and hold the two outside buttons on the Homelink system until the light starts flashing. This will erase any previously programmed codes.
Step 2: Program the Homelink System
Next, you need to program the Homelink system with the code for your garage door opener. Here’s how to do it:
-
Hold your garage door opener’s remote control about 1-3 inches away from the Homelink buttons in your Subaru.
-
Press and hold the button on your garage door opener’s remote control that you want to program to the Homelink system.
-
Simultaneously press and hold the Homelink button that you want to program with the garage door opener code.
-
Wait until the Homelink light blinks slowly. This may take up to 30 seconds.
-
Release both buttons.
-
Press the Homelink button again. If the garage door moves, then the programming was successful.
-
Repeat steps 2-6 for any additional buttons you want to program.
Step 3: Test the Homelink System
After you’ve successfully programmed the Homelink system, it’s time to test it out. Here’s how to test the Homelink system:
-
Make sure that your car is parked outside of the garage.
-
Press the Homelink button that you just programmed and hold it down. The garage door should start to move.
-
If the garage door moves, release the button and press it again to make sure that the Homelink system is working properly.
-
If the garage door doesn’t move, refer to the troubleshooting section in your Subaru owner’s manual for help.
Frequently Asked Questions
Q: What garage door openers are compatible with Subaru’s Homelink system?
A: Most garage door opener brands are compatible with Homelink, but it’s always a good idea to check your garage door opener’s manual to be sure.
Q: Can I link multiple garage doors to my Subaru’s Homelink system?
A: Yes, you can program up to three garage door openers to your Subaru’s Homelink system.
Q: What do I do if the Homelink system isn’t working properly?
A: If you encounter any issues during the linking process, refer to the troubleshooting section in your Subaru owner’s manual. If you’re still having problems, contact your local Subaru dealership for assistance.
Conclusion
Linking your Subaru to your garage door opener is a convenient feature that can save you time and hassle. By following these step-by-step instructions, you’ll be able to link your Subaru to your garage door opener in no time. Just remember to consult your garage door opener’s manual and your Subaru owner’s manual for troubleshooting guidance if you encounter any issues.
