Davis Bellew If you find yourself in a situation where you need to start your Subaru without a key or if your key is broken, then hotwiring may be your only option. Hotwiring a car may sound like a daunting task, but it’s actually a relatively simple process. In this article, we will guide you through the step-by-step process of hotwiring a Subaru.
Key Takeaways
- Hotwiring a Subaru can be done by connecting the battery, starter, and ignition wires.
- It is important to consult your vehicle’s manual or a professional before attempting to hotwire your vehicle.
- Hotwiring a Subaru without legal justification is illegal and can result in criminal charges.
What is Hotwiring?
Hotwiring is a process of starting a vehicle without a key. This process involves bypassing the ignition system and connecting the battery, starter, and ignition wires to start the engine. Hotwiring was a common practice in the past, but due to advancements in car security systems, it has become more difficult to hotwire a car. However, if you own an older Subaru or you find yourself in an emergency situation where you need to start your Subaru without a key, then hotwiring may be your only option.
Step-by-Step Guide to Hotwiring a Subaru
Before we proceed with the hotwiring process, it is important to note that hotwiring a vehicle without legal justification is illegal and can result in criminal charges. We recommend consulting your vehicle’s manual or a professional before attempting to hotwire your vehicle.
Step 1: Access the Ignition System
The first step to hotwiring a Subaru is to access the ignition system. This involves removing the steering column cover, which is usually held in place by screws or clips.
Step 2: Locate the Battery, Starter, and Ignition Wires
Once you have access to the ignition system, the next step is to locate the battery, starter, and ignition wires. The battery wire is usually red, and it connects the battery to the ignition switch. The starter wire is usually yellow or red, and it connects the ignition switch to the starter motor. The ignition wire is usually green or yellow, and it connects the ignition switch to the distributor.
Step 3: Connect the Battery Wire
The third step is to connect the battery wire. To do this, you will need to locate the wire that connects the battery to the ignition switch and disconnect it from the ignition switch. Once you have disconnected the wire, use a piece of wire to connect the battery wire to the starter wire. This will provide power to the starter motor and allow the engine to turn over.
Step 4: Connect the Starter Wire
The fourth step is to connect the starter wire. To do this, you will need to locate the wire that connects the ignition switch to the starter motor and disconnect it from the ignition switch. Once you have disconnected the wire, use a piece of wire to connect the starter wire to the battery wire. This will provide power to the starter motor and allow the engine to turn over.
Step 5: Connect the Ignition Wire
The fifth and final step is to connect the ignition wire. To do this, you will need to locate the wire that connects the ignition switch to the distributor and disconnect it from the ignition switch. Once you have disconnected the wire, use a piece of wire to connect the ignition wire to the starter wire. This will provide power to the distributor and allow the engine to start.
Congratulations! You have successfully hotwired your Subaru.
FAQ
Q: Is it legal to hotwire a car?
A: Hotwiring a car without legal justification is illegal and can result in criminal charges.
Q: Can I hotwire any Subaru?
A: Hotwiring a Subaru may not be possible on newer models due to advancements in car security systems. We recommend consulting your vehicle’s manual or a professional before attempting to hotwire your vehicle.
Q: Can I use hotwiring as a long-term solution for a broken key?
A: No, hotwiring should only be used as a temporary solution in emergency situations. We recommend getting a new key or fixing the broken key as soon as possible.
Q: Do I need any special tools to hotwire a Subaru?
A: No, hotwiring a Subaru can be done with basic tools such as pliers and wire cutters.
Q: Is hotwiring a Subaru easy?
A: Hotwiring a Subaru may sound like a daunting task, but it’s actually a relatively simple process. However, we recommend consulting your vehicle’s manual or a professional before attempting to hotwire your vehicle.
Conclusion
Hotwiring a Subaru may not be the most practical solution, but it can be a lifesaver in emergency situations. We hope that this step-by-step guide has been helpful in guiding you through the hotwiring process. Remember, hotwiring a car without legal justification is illegal and can result in criminal charges. We recommend consulting your vehicle’s manual or a professional before attempting to hotwire your vehicle.
