Billy Covington If you are experiencing issues with your windshield washers on your 2013 Subaru, you are not alone. Many Subaru owners have reported problems with their windshield washers, including not spraying enough fluid or not working at all. Fortunately, most windshield washer problems can be solved with a few simple steps. In this article, we will guide you through the process of troubleshooting and repairing your windshield washers on a 2013 Subaru.
Key Takeaways
- Windshield washer problems are a common issue among 2013 Subaru owners.
- Most windshield washer problems can be solved with basic troubleshooting.
- It’s important to maintain your windshield washer system to avoid future problems.
Step-by-Step Guide to Fixing Windshield Washers on a 2013 Subaru
Step 1: Check the Washer Fluid Reservoir
The first thing you should check when experiencing issues with your windshield washers is the washer fluid reservoir. Make sure the reservoir is full of fluid and that the cap is securely in place. If the reservoir is empty, fill it with a windshield washer fluid that is recommended for use in Subarus.
Step 2: Check the Washer Nozzles
If the reservoir is full and you still can’t get your windshield washers to work, the next thing to check is the washer nozzles. Look for any signs of blockage or damage to the nozzles. You can use a needle or a small pin to clear out any blockages in the nozzles.
Step 3: Check the Washer Pump
If the washer nozzles are clear and the reservoir is full, the issue may be with the washer pump. You will need to locate the washer pump, which is typically located in the washer fluid reservoir. Disconnect the washer pump and use a multimeter to check for voltage. If there is no voltage, the issue may be with the wiring or the switch. If there is voltage, the washer pump may be faulty and will need to be replaced.
Step 4: Replace the Washer Pump
If you have determined that the washer pump is the problem, you will need to replace it. You can purchase a new washer pump from your local auto parts store or online. To replace the washer pump, follow these steps:
- Disconnect the negative battery cable.
- Remove the washer fluid reservoir.
- Disconnect the electrical connector from the washer pump.
- Remove the pump from the reservoir.
- Install the new pump into the reservoir.
- Reconnect the electrical connector to the washer pump.
- Reinstall the washer fluid reservoir.
- Reconnect the negative battery cable.
Step 5: Check the Washer System Fuse
If your windshield washer still isn’t working after replacing the washer pump, the issue may be with the fuse. Check the fuse box and look for the fuse that controls the windshield washer system. Replace the fuse if it is blown.
Frequently Asked Questions
How often should I maintain my windshield washer system?
You should maintain your windshield washer system at least once a year. This includes checking the fluid level, clearing out any blockages in the nozzles, and checking the washer pump.
What should I do if my windshield washer still isn’t working after following these steps?
If your windshield washer still isn’t working after troubleshooting and replacing the washer pump and fuse, the issue may be with the switch or the wiring. We recommend taking your Subaru to a trusted mechanic or dealership for further diagnosis and repair.
Can I use any type of windshield washer fluid in my Subaru?
It’s recommended to use a windshield washer fluid that is specifically designed for use in Subarus. Using a different type of washer fluid may cause damage to the washer system.
Conclusion
Windshield washer problems can be frustrating, but with these troubleshooting tips, you can easily fix the problem and get back to driving safely. Remember to maintain your windshield washer system regularly to avoid future issues. If you encounter any issues that you are not comfortable fixing on your own, always seek the help of a professional.
