How to Disengage AWD on Subaru: A Comprehensive Guide

If you own a Subaru, you might be wondering how to disengage the all-wheel drive (AWD) system. Fortunately, it’s quite easy to do. In this guide, we’ll walk you through the steps to disengage the AWD on your Subaru.

Key Takeaways

  • Disengaging the AWD on your Subaru is easy and can be done in a few simple steps.
  • It’s important to only disengage the AWD in certain situations, such as when driving on dry roads or when towing your vehicle.
  • Always engage the AWD system when driving in hazardous weather conditions, such as rain or snow.

Now, let’s dive into the steps to disengage the AWD on your Subaru.

Step-by-Step Guide

Step 1: Stop Your Vehicle

The first step to disengaging the AWD on your Subaru is to bring your vehicle to a complete stop. This is important as it ensures that the AWD system is fully disengaged before you continue driving.

Step 2: Shift the Transmission to Neutral

Once your vehicle is stopped, shift the transmission to neutral. This step is necessary as it disengages the power from the transmission, which is necessary for disengaging the AWD system.

See also  How Much Does A Subaru Lifetime Warranty Cost? All You Need To Know!

Step 3: Pull the Fuse

Now, it’s time to locate the fuse box in your Subaru. The fuse box is typically located in the engine compartment, but it may also be located in the interior of the vehicle. Once you’ve located the fuse box, look for the fuse labeled "FWD" or "2WD." This is the fuse that controls the AWD system.

Using the diagram on the fuse box cover, locate the correct fuse and use a pair of pliers to gently pull it out. You may need to wiggle the fuse back and forth to remove it from the fuse box.

Step 4: Start the Engine

With the fuse removed, start the engine. You’ll notice that the "AWD" light on your dashboard will turn off. This indicates that the AWD system has been disengaged.

Step 5: Replace the Fuse

Once you’ve disengaged the AWD system, you’ll need to replace the fuse in order to re-engage it. To do this, simply locate the fuse labeled "FWD" or "2WD" and insert it back into the fuse box.

Step 6: Shift the Transmission to Drive

Now that the fuse has been replaced, it’s time to shift the transmission back into drive. Once you’ve done this, you’re ready to continue driving your Subaru.

Tips and Common Mistakes to Avoid

  • Only disengage the AWD system when driving on dry roads or when towing your vehicle. You should always engage the AWD system when driving in hazardous weather conditions, such as rain or snow.
  • Make sure to stop your vehicle completely before disengaging the AWD system. This ensures that the AWD system is fully disengaged before you continue driving.
  • Always replace the fuse after disengaging the AWD system. Failure to do so can result in damage to your vehicle.
See also  Subaru Oil Change: How Often Should You Change Oil in Your Subaru for Optimal Performance and Longevity?

FAQ

Q: Can I drive my Subaru without the AWD system engaged?

A: Yes, you can drive your Subaru without the AWD system engaged. However, it’s important to only do so on dry roads or when towing your vehicle. Always engage the AWD system when driving in hazardous weather conditions, such as rain or snow.

Q: Is it safe to disengage the AWD system on my Subaru?

A: Yes, it’s safe to disengage the AWD system on your Subaru when driving on dry roads or when towing your vehicle. However, you should always engage the AWD system when driving in hazardous weather conditions, such as rain or snow.

Q: How do I know if the AWD system is engaged on my Subaru?

A: The AWD system is engaged when the "AWD" light on your dashboard is illuminated. If the light is off, the AWD system is disengaged.

Q: Can I disengage the AWD system on my Subaru while driving?

A: No, you should never disengage the AWD system on your Subaru while driving. Always bring your vehicle to a complete stop before disengaging the AWD system.

Conclusion

Disengaging the AWD on your Subaru is easy and can be done in a few simple steps. However, it’s important to only disengage the AWD in certain situations and to always engage it when driving in hazardous weather conditions. By following the steps outlined in this guide, you can safely and easily disengage the AWD system on your Subaru.

Avatar photo

Davis Bellew

As a Subaru owner and enthusiast, Davis has a deep understanding of the needs and concerns of Subaru drivers. He specializes in writing informative and engaging content about Subaru maintenance and repair, and his articles are always well-researched and easy to understand. When he's not writing, he enjoys hiking and photography.

Recommended Articles