Alton Brobst If you’re a proud owner of a 99 Subaru, it’s likely that you’ve faced an issue with the car alarm system at least once. While the alarm system is a crucial security feature, it can become a nuisance when it starts going off unexpectedly. Fortunately, disabling the alarm system is a quick and easy process. In this article, we’ll guide you through the steps to disable the alarm system on your 99 Subaru.
Key Takeaways
- Disabling the alarm system on a 99 Subaru requires turning the ignition key to specific positions.
- The process can vary slightly depending on the type of alarm system installed in your car.
- Disconnecting the battery can also serve as a temporary solution to the alarm system issue, but it may cause other problems.
Step-by-Step Guide to Disable Alarm System on 99 Subaru
Step 1: Unlock the car
First and foremost, make sure the car is unlocked. Attempting to disable the alarm system while the car is locked can be dangerous and may cause the alarm to go off.
Step 2: Get inside the car
Once the car is unlocked, get inside and close all the doors.
Step 3: Insert key into ignition
Insert the ignition key into the ignition and turn it to the "on" position. This is the position right before the "start" position.
Step 4: Press and hold the brake pedal
While the key is in the "on" position, press and hold down the brake pedal.
Step 5: Turn the key to the "off" position
With the brake pedal still pressed down, turn the key to the "off" position.
Step 6: Turn the key to the "on" position again
Without releasing the brake pedal, turn the key back to the "on" position.
Step 7: Repeat Steps 5 and 6
Repeat Steps 5 and 6 three more times, for a total of four times.
Step 8: Turn the key to the "start" position
Finally, turn the key to the "start" position to start the car. The alarm system should now be disabled.
Tips and Tricks
- If you’re unsure about the type of alarm system installed in your car, refer to the owner’s manual for specific instructions.
- Disabling the alarm system using the key method may only be a temporary solution. If you’re facing frequent issues with the alarm system, it’s recommended to seek professional help.
- Disconnecting the battery can also serve as a temporary fix to the alarm system issue. However, this can cause other problems such as losing radio presets and resetting the clock.
Frequently Asked Questions
Q: Will disabling the alarm system affect other features of the car?
A: No, disabling the alarm system using the key method only affects the alarm system. Other features of the car should remain unaffected.
Q: Can I permanently disable the alarm system?
A: While it’s possible to permanently disable the alarm system, it’s not recommended as it may compromise the security of the car. It’s recommended to seek professional help if you’re facing frequent issues with the alarm system.
Q: Will disconnecting the battery disable the alarm system?
A: Yes, disconnecting the battery can temporarily disable the alarm system. However, it can cause other issues such as resetting the clock and losing radio presets.
Q: Why does the alarm system go off unexpectedly?
A: There can be several reasons why the alarm system goes off unexpectedly, including a faulty sensor or a weak battery. It’s recommended to seek professional help to identify the exact cause of the issue.
In conclusion, disabling the alarm system on a 99 Subaru is a simple and easy process that can be done using the ignition key. However, if you’re facing frequent issues with the alarm system, it’s recommended to seek professional help to identify and fix the underlying issue.
