Peter Banks Are you having trouble with your Subaru key fob? Is it not responding or not unlocking your car? A dead battery may be the culprit behind the issue. Fortunately, replacing the battery in your 2014 Subaru key fob is a straightforward process that you can do yourself. In this article, we will guide you through the simple steps to help you change the battery in your key fob.
Audience and their Persona
This article targets Subaru owners who want to perform simple DIY maintenance of their key fobs. The reader is expected to have some basic knowledge about automotive maintenance. The article aims to provide clear instructions to help readers gain confidence in working with the key fob.
Battery Type
Before you start opening the key fob, you need to know the type of battery that works with your 2014 Subaru. The key fob for your car uses a CR2032 3V lithium coin-cell battery. Please ensure you purchase a battery of this type before proceeding with the steps outlined below.
Steps to Replace the Key Fob Battery
Step 1: Open the Key Fob
First, locate the small button on the back of the key fob. Press it to release the key blade.
Image source: Credit to subaruonlineparts.com
Next, using a small flathead screwdriver, or something similar, carefully insert it into the gap on the side of the key fob. Gently pry apart the two halves of the fob to open it.
Step 2: Locate the Battery
Find the battery within the fob. You will usually find it near the keyring hole.
Image source: Credit to subaruonlineparts.com
Step 3: Remove the old battery
Remove the battery by gently pushing the battery from one side and lifting it upwards. Do not try to pry the battery out with a sharp object such as a knife or screwdriver to avoid damaging the circuit board.
Step 4: Insert the new battery
Insert the new battery in the same position and orientation as the old battery. Make sure the positive (+) side faces up. Gently press down until you hear a click.
Image source: Credit to subaruonlineparts.com
Step 5: Close the key fob
Realign the two halves of the key fob and press them together. You might hear a click, indicating that the fob is properly aligned. Finally, reinsert the key blade, and you’re all set.
That’s it – you’ve successfully changed the battery in your 2014 Subaru key fob.
Tips for Testing the Key Fob
To ensure that your key fob is now working correctly, press any of the buttons on the fob. The LED light on the fob should blink several times. Test the fob’s functions and verify that it is unlocking and locking your car as expected.
If you discover that your key fob isn’t responding as it should, try rechecking the battery’s position, or try cleaning the battery contacts on the circuit board.
Frequently Asked Questions
How long does the battery last in a 2014 Subaru key fob?
The lifespan of your key fob battery is dependent on usage frequencies. Batteries usually last about two to three years before they need to be replaced.
What should I do if the key fob continues to malfunction even after I replace the battery?
If the battery replacement attempt doesn’t fix the issue, your key fob may have a more extensive problem, such as a damaged circuit board. In this case, consider taking your key fob to a mechanic or dealership to assess the situation.
Final Thoughts
With the easy-to-follow steps and tips in this article, you can easily change the dead battery in your Subaru key fob. Performing this DIY task helps you save time and money by avoiding the need to take your key fob to a dealership or mechanic. Remember to use the correct battery type and handle the key fob securely to avoid causing additional damages.
