Peter Banks Are you experiencing difficulties starting your 1996, 1997, or 1998 Subaru? Does your car make a clicking sound when you try to start it? This could be a sign that your starter needs to be replaced. Replacing the starter in your Subaru is a relatively easy process that you can do yourself with the right tools and some basic knowledge. In this article, we will guide you through the steps to change the starter in your 1996-1998 Subaru.
Key Takeaways
- A clicking sound when trying to start your Subaru can indicate a failing starter.
- Replacing the starter in your 1996-1998 Subaru can be done with basic knowledge and tools.
- Make sure to disconnect the battery before removing the old starter.
- The starter is located under the engine, near the transmission.
Tools Required
Before we begin, you will need the following tools:
- Socket set
- Wrench set
- Jack and jack stands
- Pliers
Step-by-Step Guide
Step 1: Disconnect the Battery
Before you start working on your Subaru, you need to disconnect the battery. This will prevent any electrical shocks while you are working on the car.
Step 2: Raise the Car
Next, you need to raise your Subaru using a jack and jack stands. This will give you better access to the starter. Make sure to place the jack stands in a safe location under the car’s frame.
Step 3: Locate the Starter
The starter in your 1996-1998 Subaru is located under the engine, near the transmission. You should be able to see it from underneath the car. It is a cylindrical device about the size of a large can of soup.
Step 4: Remove the Bolts
Using a socket set and wrench set, remove the bolts that hold the starter in place. There should be two bolts that need to be removed.
Step 5: Disconnect the Wires
After removing the bolts, you need to disconnect the wires that are connected to the starter. There should be two wires: one that is connected to the starter solenoid and one that is connected to the starter motor. Use pliers to remove the wires.
Step 6: Remove the Starter
Once the wires are disconnected, you can remove the starter from the car. Be careful not to damage any other parts of the car while removing the starter.
Step 7: Install the New Starter
Now that the old starter has been removed, you can install the new starter. Simply reverse the steps you took to remove the old starter. Connect the wires first, then attach the starter to the car using the bolts.
Step 8: Lower the Car
Once the new starter is installed, you can lower your Subaru back to the ground using the jack and jack stands.
Step 9: Reconnect the Battery
Finally, reconnect the battery and start your car to check if the new starter is working properly.
Congratulations! You have successfully replaced the starter in your 1996-1998 Subaru.
FAQs
Q: How do I know if my starter needs to be replaced?
A: If you hear a clicking sound when trying to start your car, it could indicate a failing starter.
Q: Do I need to disconnect the battery before replacing the starter?
A: Yes, it is important to disconnect the battery before working on your car to prevent any electrical shocks.
Q: Can I replace the starter in my Subaru myself?
A: Yes, replacing the starter in your 1996-1998 Subaru is a relatively easy process that can be done with basic knowledge and tools.
Q: Where is the starter located in my Subaru?
A: The starter in your 1996-1998 Subaru is located under the engine, near the transmission.
Conclusion
Replacing the starter in your 1996-1998 Subaru is a task that you can do yourself with some basic tools and knowledge. By following the steps outlined in this article, you can have your car up and running in no time. Remember to always take safety precautions and consult a professional if you are unsure about any steps.
