How to Change Engine Filter in 2013 Subaru Crosstrek: A Comprehensive Guide

If you own a 2013 Subaru Crosstrek, it’s important to take care of your vehicle by regularly changing the engine filter. A clean filter allows your engine to function at its best, improving performance and extending the life of your vehicle. Changing the engine filter is a relatively easy task that you can do yourself with the right tools and a little bit of patience. In this article, we’ll walk you through the steps of changing the engine filter in your 2013 Subaru Crosstrek, and provide some tips and tricks along the way.

Key Takeaways

  • Regularly changing the engine filter in your 2013 Subaru Crosstrek is an important part of maintaining your vehicle’s health.
  • Changing the engine filter is a relatively easy task that you can do yourself with the right tools and a little bit of patience.
  • You should change your engine filter every 12,000 to 15,000 miles, or more frequently if you drive in dusty or dirty conditions.

What You’ll Need

Before you get started, you’ll need a few tools and supplies:

  • A new engine filter (make sure it’s the correct filter for your 2013 Subaru Crosstrek)
  • A socket wrench with a 10mm socket
  • A Phillips screwdriver
  • A flathead screwdriver
  • A clean cloth or rag
  • Gloves (optional)
See also  How Heavy Is a Subaru Forester? Exploring Weight and Its Impact

Step-by-Step Guide

Now that you have your tools and supplies ready, follow these steps to change the engine filter in your 2013 Subaru Crosstrek:

Step 1: Access the Engine Filter

Locate the engine filter in your 2013 Subaru Crosstrek. It’s located in the engine compartment, on the passenger side of the engine, near the front of the vehicle. There should be a black plastic cover over the filter.

Step 2: Remove the Cover

Using a socket wrench with a 10mm socket, remove the bolt that holds the plastic cover in place. Once the bolt is removed, use a flathead screwdriver to gently pry the cover off.

Step 3: Remove the Old Filter

Once the cover is removed, you should see the old engine filter. Take note of how the filter is positioned in the housing so that you can replace it correctly. Using a Phillips screwdriver, loosen the clamp that holds the filter in place. Once the clamp is loose, remove the old filter from the housing.

Step 4: Install the New Filter

Take your new engine filter and insert it into the housing, making sure that it’s in the correct position. Tighten the clamp to hold the filter in place.

Step 5: Reinstall the Cover

Clean the cover with a clean cloth or rag, and then reinstall it. Make sure that the cover is properly aligned and seated, and then tighten the bolt with the socket wrench.

Step 6: Start the Engine

Start your engine and let it run for a few minutes. This will help to ensure that the new filter is properly installed and working correctly.

See also  How Much Does the Subaru Forester Weigh? – A Comparison to Other Popular SUVs

Congratulations! You’ve successfully changed the engine filter in your 2013 Subaru Crosstrek. You should notice improved performance and fuel efficiency in your vehicle.

Tips and Tricks

  • Always make sure that you have the correct engine filter for your 2013 Subaru Crosstrek. Using the wrong filter can cause damage to your engine.
  • It’s a good idea to wear gloves when changing the engine filter, as it can be a dirty job.
  • You should change your engine filter every 12,000 to 15,000 miles, or more frequently if you drive in dusty or dirty conditions.
  • If you’re unsure about changing the engine filter yourself, consult your owner’s manual or take your vehicle to a professional mechanic.

Frequently Asked Questions

Q: How often should I change the engine filter in my 2013 Subaru Crosstrek?

A: You should change the engine filter every 12,000 to 15,000 miles, or more frequently if you drive in dusty or dirty conditions.

Q: What happens if I don’t change my engine filter?

A: If you don’t change your engine filter regularly, it can become clogged with dirt and debris. This can reduce your engine’s performance and fuel efficiency, and can eventually cause damage to your engine.

Q: Can I use any engine filter in my 2013 Subaru Crosstrek?

A: No, you should always use the correct engine filter for your vehicle. Using the wrong filter can cause damage to your engine.

Avatar photo

Davis Bellew

As a Subaru owner and enthusiast, Davis has a deep understanding of the needs and concerns of Subaru drivers. He specializes in writing informative and engaging content about Subaru maintenance and repair, and his articles are always well-researched and easy to understand. When he's not writing, he enjoys hiking and photography.

Recommended Articles