Everything You Need to Know About Subaru Part Number 61100fe040: Compatibility, Replacement, and Maintenance

If you’re the owner of a Subaru, you know that regular maintenance is essential for keeping your car in good condition. One of the most critical aspects of car maintenance is replacing worn-out parts with new ones. In this article, we’ll take a closer look at Subaru part number 61100fe040 – what it is, how it works, and everything else you need to know about it.

What is Subaru Part Number 61100fe040?

Subaru part number 61100fe040 is the front bumper beam for several Subaru models. The front bumper beam is an essential safety feature that helps to protect the car and its passengers in the event of an accident. It’s made of high-strength steel and designed to absorb the impact of a collision.

The Purpose of The Part in the Car

The front bumper beam is a crucial safety component of the car. It provides structural support for the bumper cover and protects the engine and other vital components from damage in the event of an accident. The front bumper beam also serves as an attachment point for other front-end components, including the grille, headlights, and fog lights.

See also  DIY Guide to Repinning Subaru ECU Plug: Boost Your Car's Performance with Ease

Which Subaru Models Use This Part?

Subaru part number 61100fe040 is used in several Subaru models, including:

  • 2008-2011 Subaru Impreza
  • 2008-2011 Subaru Impreza WRX
  • 2008-2014 Subaru WRX STI

How to Replace This Part in The Car

If your Subaru has been in a front-end collision or if you need to replace the front bumper beam for any other reason, here’s how you can do it:

  1. Remove the front bumper cover: Start by removing the screws and bolts that hold the bumper cover in place. You may need to use a trim tool to remove any plastic clips that hold the bumper cover in place.

  2. Remove the front bumper beam: Once the bumper cover is removed, you’ll see the front bumper beam. Use a socket wrench to remove the bolts that hold the bumper beam in place.

  3. Install the new front bumper beam: Replace the old bumper beam with the new one, and use the socket wrench to tighten the bolts.

  4. Reinstall the front bumper cover: Fit the bumper cover back into its original position and secure it with the screws and bolts that you removed earlier.

Other Compatible Parts That Can Replace This Part

If you’re looking for an alternative to Subaru part number 61100fe040, you might want to consider the following:

  • Keystone Automotive GM1006655: This replacement part is compatible with the above-mentioned Subaru models and costs less than the original part.
  • K-Metal® 8314110Q: This part is also compatible with the above-mentioned Subaru models and has a similar price to the Keystone Automotive part.
See also  Does Manual Transmission 2012 Subaru Have Head Gasket Issues?

Make sure to check with your Subaru dealer or mechanic to ensure compatibility with your car before purchasing any replacement parts.

Cost and Availability of The Part

The cost of Subaru part number 61100fe040 varies, depending on where you buy it. You can purchase it from Subaru dealerships or online automotive parts retailers. The price range is between $200-$400, approximately.

Tips for Maintaining The Part in Good Condition

To ensure the longevity of the front bumper beam, you should keep it away from saltwater, salt chemicals, and other corrosive substances. You should also check the bumper beam regularly for any signs of damage or wear and tear and replace it immediately if you notice any issues.


Q1. Which Subaru models use part number 61100fe040?

A1. This part is compatible with 2008-2011 Subaru Impreza, 2008-2011 Subaru Impreza WRX, and 2008-2014 Subaru WRX STI models.

Q2. Is Subaru part number 61100fe040 expensive?

A2. The price of this part ranges from $200-$400, depending on where you purchase it.

Q3. Can I use alternative parts instead of Subaru part number 61100fe040?

A3. Yes, there are alternative parts compatible with the above-mentioned Subaru models, such as Keystone Automotive GM1006655 and K-Metal® 8314110Q.

Q4. How do I replace the front bumper beam in my Subaru?

A4. To replace the front bumper beam in your Subaru, first remove the front bumper cover. Then, remove the old bumper beam and replace it with the new one. Finally, reinstall the front bumper cover in its original position.


Subaru part number 61100fe040 is an essential front bumper beam that provides crucial structural support and protection to the car and its occupants. It’s essential to replace this part if it’s worn out or damaged to ensure the safety and longevity of your Subaru. By following the steps outlined in this article, you’ll have all the information you need to replace this part successfully and keep your car in top condition.

See also  Can You Turn Down Volume on Lane Assist Subaru?
Avatar photo

Peter Banks

With years of experience as a professional mechanic and Subaru specialist, Peter is one of the most respected members of our team. He's written several articles on Subaru maintenance and repair, and his advice and tips are always practical and helpful. When he's not working on cars, he enjoys cooking and trying out new recipes.

Recommended Articles