Joseph Weaver As a Subaru car owner, you understand that a key fob is an essential component for unlocking your Subaru car’s doors, trunk, and starting the engine. If your key fob is lost, damaged, or not functioning correctly, you might be faced with an expensive replacement at your dealership. However, you can save time and money by programming a new key fob yourself. In this DIY guide, we will show you how to program your 2010 Subaru Key Fob easily in minutes.
Importance of Programming Your Subaru Key Fob
Programming your Subaru key fob is more than unlocking your car’s doors; it is critical in ensuring the safety of your vehicle’s security system. By programming your key fob, you are syncing the device with your car’s computer system to ensure only the programmed key fob can start the engine. Without programming your key fob to your car’s computer, someone could start the engine with an unprogrammed key, putting your vehicle at risk.
Materials Required for Programming
To program your 2010 Subaru Key Fob, you need to have both the key fob and your car’s owner manual. Your owner’s manual is essential as it contains the programming instructions specific to your car’s model and year.
How to Program the Subaru Key Fob
-
Open the driver’s door and manually lock it from the inside with the physical key.
-
Insert your car’s key into the ignition and turn it to the "ON" position. Ensure the door is still closed.
-
After five seconds, turn back the key to the "OFF" position. Repeat this step three more times while waiting five seconds in between each iteration.
-
After the fourth time, turn the key back to the "ON" position. The doors should lock, unlock, and then lock again. This proves that your car is now in the key fob programming mode.
-
Press and hold the "LOCK" and "UNLOCK" buttons on the key fob together. After fifteen seconds, the car’s horn will beep once, indicating the key fob is now programmed.
-
Release the buttons and then turn off the car’s ignition. Test the key fob for its functionality.
If the above steps do not work, consult your owner’s manual for further instructions or contact a reliable auto mechanic.
Finding Key Fob Programming Instructions for Subaru 2010 Models
The key fob programming instructions may differ based on your car’s year or model. However, these instructions always come with your car’s owner’s manual. Hence, before attempting any programming, refer to the owner’s manual carefully. You may also consult the dealership or the internet for further assistance.
Troubleshooting Tips
If your key fob is still not working correctly, these tips may help:
-
Ensure you are using the correct battery size for your key fob model.
-
Inspect the key fob for any signs of physical damage or wear and tear.
-
Check your car’s battery; this may be the root cause of the key fob malfunctioning.
-
Check and replace any blown fuses related to the car’s keyless entry system.
FAQ
Q: What should I do if my key fob still does not work after programming?
A: Inspect the battery, check for any physical damage, and replace any blown fuses associated with the keyless entry system. Consult your owner’s manual for further instructions or contact a reliable auto mechanic.
Q: Can I program the key fob myself?
A: Yes, you can program the key fob yourself by following the programming instructions in your owner’s manual.
Q: How much does it cost to replace a Subaru key fob at a dealership?
A: The cost of a key fob replacement varies based on the dealership’s location and any additional features. However, it can cost anywhere between $100 to $300.
By following the above steps, you can program your 2010 Subaru Key Fob easily in minutes. Programming your key fob is simple and cost-effective, saving you time and money in the long run. As a Subaru owner, always ensure to keep your key fob in good condition and programmed to your car for optimal safety.
