Alton Brobst If you own a Subaru car and have a key fob manufactured in 2012, it is highly likely that you will need to replace the battery at some point. While you could take your key fob to the dealership or a mechanic to replace the battery for you, doing so can be quite expensive. By following the step-by-step instructions in this DIY guide, you can save money and learn how to open your Subaru key fob 2012 yourself.
Identifying the Type of Key Fob Used in the 2012 Model
Before you begin opening your Subaru key fob, it is important to identify the type of key fob that is used in the 2012 model. There are generally two types of key fobs that are used in Subaru cars, which are the rectangular shaped fobs and the circular shaped fobs. The 2012 model uses the rectangular shaped fobs. You can typically find this information in your car’s owner manual.
Necessary Tools for Opening the Key Fob
Before you start opening your Subaru key fob, you will need a few essential tools. These tools include a small flathead screwdriver, a CR1620 battery, and a pair of tweezers.
Step-by-Step Instructions for Opening the Key Fob
-
Locate the small notch on the side of your key fob. This notch is usually located on the bottom left or bottom right corner of the key fob.
-
Insert the small flathead screwdriver into the notch and gently pry it open. The key fob should open up easily, revealing the inside components.
-
Use the tweezers to remove the old battery. Be sure to handle the battery carefully and avoid touching the electrical contacts on the new battery.
-
Insert the new CR1620 battery into the key fob with the positive side facing upwards.
-
Close the key fob by gently pushing the two halves together until you hear a satisfying click.
Your Subaru key fob 2012 is now open and ready for use with a new battery.
Key Fob Battery Replacement
Replacing the battery in your Subaru key fob is a fairly simple process that can save you money in the long run. Ideally, you should replace your key fob battery every 2-3 years or whenever you notice that the key fob is not responding as quickly as it used to.
There are some signs that your key fob battery needs to be replaced, such as the fob not responding when you push the buttons or the range of the key fob decreasing. If you notice any of these symptoms, it is probably time to replace the battery.
Subaru Car Maintenance
Subaru cars, like most vehicles, require regular maintenance to keep them running smoothly. In addition to replacing your key fob battery, there are other maintenance tasks that you can perform yourself to save money. These tasks can include replacing your air filter, checking the fluid levels, and changing the oil.
By taking care of your car’s maintenance needs on your own, you can save money on costly repairs and extend the lifespan of your vehicle.
DIY Car Repairs
Performing DIY car repairs can be a fun and rewarding experience, and it can save you a lot of money in the long run. While some car repairs are best left to trained mechanics, there are many repairs that you can do at home with the right tools and instructions.
Whether you are replacing your key fob battery, changing your oil, or replacing your air filter, performing DIY car repairs is a great way to save money and learn new skills.
FAQs:
Q: Can I open my Subaru key fob if I have a circular shaped fob?
A: No, the circular shaped key fob requires a different method of opening. It is best to consult your owner manual or take it to a dealership or mechanic for battery replacement.
Q: How long do Subaru key fob batteries typically last?
A: Ideally, you should replace your key fob battery every 2-3 years or whenever you notice that the key fob is not responding as quickly as before.
Q: Will opening my Subaru key fob void my warranty?
A: No, as long as you follow the correct procedures, opening your key fob will not affect your warranty.
Q: Can I use any type of battery to replace my key fob battery?
A: No, it is important to use the correct size and type of battery for your key fob. For the Subaru key fob 2012 model, you should use a CR1620 battery.
In conclusion, following this DIY guide can help you open your Subaru key fob 2012 safely and easily. By replacing your key fob battery on your own, you can save money and avoid the hassle of taking it to a dealership or mechanic. Remember to handle the battery carefully and avoid touching the electrical contacts. By taking care of your own car maintenance needs, you can save money in the long run and keep your Subaru running smoothly.
