Peter Banks The crankshaft position sensor is a vital component of the engine in a vehicle. It is responsible for measuring the rotational speed and position of the crankshaft in the engine. This information is used by the engine control unit (ECU) to control various engine functions, such as ignition timing and fuel injection timing. A faulty crankshaft position sensor in a 1995 Subaru can lead to poor engine performance, decreased fuel efficiency, and engine failure. In this article, we will discuss everything you need to know about the pricing and availability of a genuine 1995 Subaru crankshaft position sensor, including how to install it.
What is a Crankshaft Position Sensor?
The crankshaft position sensor, also known as CKP sensor, is located near the bottom of the engine, close to the crankshaft pulley. Its main function is to detect the position and rotational speed of the crankshaft. The sensor sends this information to the engine control unit, which uses it to determine the ignition timing and fuel injection timing.
Signs of a Faulty Crankshaft Position Sensor in a Subaru
There are a few telltale signs of a faulty crankshaft position sensor in a 1995 Subaru. You might experience difficulty in starting the engine, engine stalling or misfiring, poor fuel economy, and trouble accelerating. The check engine light in your car could also illuminate, indicating a problem with the sensor. If you suspect a faulty crankshaft position sensor, it’s essential to have it checked and replaced if needed.
Pricing of a Genuine 1995 Subaru Crankshaft Position Sensor
The pricing of a genuine 1995 Subaru crankshaft position sensor can vary depending on where you purchase the sensor. A quick search online reveals that you can find the sensor ranging from $65-$250. It’s essential to note that the prices of counterfeit or third-party crankshaft position sensors are often cheaper. However, using anything other than a genuine sensor can pose a significant risk to your vehicle and its engine. It’s crucial to ensure you’re getting a genuine product for the best protection of your investment.
Where to Purchase a Genuine 1995 Subaru Crankshaft Position Sensor
You can purchase a genuine 1995 crankshaft position sensor from a Subaru dealership, auto parts store, or an online retailer. It’s essential to ensure that you’re getting a genuine sensor from a reputable dealer. Check for reviews and comments about their products on their website and review sites. The good news is that purchasing the sensor from a Subaru dealership or auto parts store usually means you are getting a genuine sensor at a fair price.
How to Install a Crankshaft Position Sensor
Installing a crankshaft position sensor in a 1995 Subaru is often a straightforward process that you can do yourself. Before starting, ensure that you have the right tools, the new sensor, and your vehicle’s owner manual.
Step 1: Prepare the Car
Start by parking the car in a safe place where there is enough room to work on it. Ensure the car engine is off and any electrical wires and connections are disconnected before working on the sensor.
Step 2: Locate the Sensor
Find the crankshaft position sensor, which is often located near the crankshaft pulley at the bottom of the engine. Check your vehicle owner’s manual for its exact location.
Step 3: Remove the Old Sensor
Unplug the connector from the old sensor carefully. The sensor bolts will be located around the sensor using a wrench. After that, use a socket wrench to remove them.
Step 4: Install the New Sensor
Set the new sensor in place and bolt it on tightly, ensuring the proper distance from the flywheel teeth, according to the manufacturer’s recommendations. Reconnect the wiring connector carefully.
Step 5: Test the New Sensor
Start the engine and test the new sensor’s operation by revving the engine and making sure it performs correctly.
Frequently Asked Questions (FAQ)
Q: What happens if I don’t replace a faulty crankshaft position sensor?
A: A faulty crankshaft position sensor can lead to poor engine performance, decreased fuel efficiency, and even engine failure. It’s essential to have it replaced as soon as possible.
Q: Can I install a crankshaft position sensor myself?
A: Yes, you can install a crankshaft position sensor yourself if you have the right tools, replacement, and knowledge on how to do it. However, we recommend consulting with an expert or the manufacturer if you’re not comfortable doing it yourself.
Q: How can I tell if the crankshaft position sensor I’m purchasing is genuine?
A: Purchase from a reputable Subaru parts dealer or auto parts store, check for customer reviews, and ask for the warranty that comes with the product if available.
Conclusion
A faulty crankshaft position sensor can lead to significant engine problems in your 1995 Subaru. Ensure that you are purchasing a genuine product and not falling prey to counterfeit products that can lead to significant issues in the future. Remember, the crankshaft position sensor is a crucial component that affects how the engine runs, and replacing it is vital. We hope this guide has provided valuable information on the pricing, availability, and installation of a genuine 1995 Subaru crankshaft position sensor.
