Davis Bellew If you are the proud owner of a Subaru Outback 2017, then you know how important the key fob is for unlocking and locking your car. However, if your key fob is not working properly, it can be a frustrating experience. One solution is to go to the dealership to have it programmed, but this can be costly. The good news is that you can program your key fob on your own, and in this article, we will guide you through the process in 5 simple steps.
Introduction to the Subaru Outback 2017 Key Fob
The Subaru Outback 2017 key fob is a small remote that communicates with your car’s control module. With the simple push of a button, you can unlock or lock your car, and even open the trunk. In some cases, the key fob can be used to start the car as well. However, if the key fob is not programmed correctly, it will not function properly.
Preparation Needed Before Programming the Key Fob
Before proceeding with the programming process, there are a few things you need to prepare. These include:
- A new key fob that is compatible with your Subaru Outback 2017 model (you can purchase one from a local dealer or online)
- A programmed master key
- Enough time to complete the programming process, which can take up to 30 minutes
- A quiet environment with no distractions
It is important to note that if you have lost all your keys, you will need to visit the dealership to have new keys programmed.
Step-by-Step Guide on How to Program the Key Fob
Now that you have everything you need, let’s dive into the step-by-step guide:
Step 1: Get into your car and close all doors. Insert your programmed master key into the ignition and turn it to the "On" position without starting the engine.
Step 2: Within 10 seconds of turning the key to the "On" position, press and release the "Lock" or "Unlock" button on the new key fob. The doors should lock and then unlock to confirm that the programming was successful.
Step 3: Turn the key to the "Off" position and remove it from the ignition. Test the new key fob to make sure it is working properly by pressing the lock, unlock, and trunk buttons.
Step 4: Repeat step 2 for any additional key fobs that you want to program.
Step 5: Once you have programmed all your key fobs, test them again to make sure they are all working properly. If you have any issues, refer to the troubleshooting section below.
Tips and Troubleshooting for Common Mistakes
Here are some tips to ensure a successful programming process:
- Make sure you have the correct key fob for your Subaru Outback 2017 model.
- The key fob must be programmed within 30 seconds of turning the key to the "On" position.
- If the doors do not lock and then unlock, the programming was not successful. Start again from step 1.
- If you lose a key fob, it is important to program new ones immediately to ensure your car’s security.
How to Reprogram the Key Fob in Case of Failure
If the programming process fails, you can try again by starting from step 1. If the second attempt also fails, it is recommended to visit the dealership to have the key fob programmed.
Conclusion
Programming your Subaru Outback 2017 key fob is a simple process that can save you time and money. By following these 5 easy steps, you can have your key fob working properly in no time. With our comprehensive guide, you have all the knowledge to program and reprogram your key fob without visiting the dealership. Enjoy the convenience and ease of use of your newly programmed key fob!
FAQ
Q: Can I program my key fob myself without going to the dealership?
A: Yes, you can program your key fob yourself by following the step-by-step guide outlined above.
Q: Can I program multiple key fobs myself?
A: Yes, you can program multiple key fobs using the same master key. Just follow the steps outlined above for each key fob that you want to program.
Q: What do I do if the programming process fails?
A: If the programming process fails, try again from step 1. If the second attempt also fails, it is recommended to visit the dealership to have the key fob programmed.
Q: How often do I need to replace the battery in my key fob?
A: It is recommended to replace the battery every 1-2 years or when the battery starts to show signs of dying, such as a weakened signal or slower response time.
Q: What do I do if I lose all my keys?
A: If you lose all your keys, you will need to visit the dealership to have new keys programmed as it is not possible to program new keys without a programmed master key.
