Joseph Weaver If you’re ever stranded with a dead battery and need to jump-start your Subaru Outback 2017, you’re in luck! Jump-starting your car is a relatively simple process that can easily be done with the right materials and a little know-how. This guide will provide you with a step-by-step overview of the process, as well as safety precautions, troubleshooting tips, and battery maintenance information.
Safety Precautions
Before attempting to jump-start your car, it’s important to take the necessary safety precautions to prevent any accidents or damage to your car.
- Make sure both cars are turned off and not in gear.
- Wear protective gloves and eye gear to prevent any accidents.
- Ensure that the jumper cables are not touching each other or any metal surfaces on the engine.
- If any warning lights or smoke is observed, do not continue with the jump-starting process.
Materials Needed
To jump-start your Subaru Outback 2017, you’ll need the following materials:
- Jumper cables
- A functioning car with a charged battery
- Owner’s manual
- Protective gloves and eye gear
Step-by-Step Instructions
Follow these five steps to jump-start your Subaru Outback 2017 quickly and safely:
- Pull the functioning vehicle close to the car with the dead battery so the jumper cables can reach both vehicles.
- Attach the red jumper cable to the positive terminal (+) of the dead battery and then attach the other end to the positive terminal (+) of the charged battery.
- Attach the black jumper cable to the negative terminal (-) of the charged battery and then attach the other end to an unpainted metal surface on your Outback away from the battery.
- Turn on the functioning vehicle and wait a few minutes to allow the charged battery to charge the dead battery.
- Attempt to start your Subaru Outback. If it doesn’t start right away, wait a few more minutes and try again. If it still doesn’t start, we recommend contacting a professional mechanic to troubleshoot further.
Troubleshooting Tips
If your car still fails to start after jumpstarting, you might have an electrical issue that includes your alternator or starter, meaning that simply jump-starting your car will become an exercise in futility.
It’s essential that if you don’t feel safe or have any doubts regarding jumpstarting your car, it’s best to contact a professional.
Additional Information
Understanding why your Subaru Outback won’t start can sometimes be a bit tricky. With the help of your owner’s manual, it’s recommended to be aware of any symptoms of a dead battery and how to properly maintain your car’s battery and charging system.
Additionally, understanding the root causes of dead batteries, such as leaving lights on, will enable you to prevent similar problems in the future.
Frequently Asked Questions (FAQ)
What causes a dead battery?
Dead batteries are commonly caused by leaving the car lights on, cold weather, or a malfunctioning charging system.
Can I use jump-starting methods to my Subaru Outback 2017 on other car models?
Yes, the process of jump-starting a car is similar regardless of the model of a car. You will need to check the owner’s manual for a specific car model to identify any unique differences in the process.
Can I jump-start a car on my own?
It is not recommended to jump-start a car alone. It’s best to have someone be present to assist with the process, watch for any warning signs, and to ensure the safety of everyone involved.
