How to Reset TPMS on 2019 Subaru Outback

Are you having trouble with the TPMS (Tire Pressure Monitoring System) on your 2019 Subaru Outback? Do you have a warning light illuminated on your dashboard and don’t know what to do? No need to worry, as we have got you covered. In this article, we will guide you through the process of resetting TPMS on your 2019 Subaru Outback, step-by-step.

Key Takeaways

  • TPMS is an important safety feature that alerts you when your tire pressure is low.
  • It is recommended to check your tire pressure regularly to avoid any issues with TPMS.
  • You can reset TPMS on your 2019 Subaru Outback using the TPMS reset button.

Understanding TPMS

TPMS is an electronic system that monitors the tire pressure in your vehicle. The system uses sensors mounted in each tire to measure the air pressure in the tire. If the pressure drops below a certain threshold, the system will alert you by illuminating a warning light on your dashboard.

It is important to note that TPMS is a safety feature that is designed to protect you and your vehicle. Low tire pressure can affect the handling of your vehicle, decrease fuel efficiency, and increase the risk of a tire blowout. Therefore, it is crucial to ensure that your tire pressure is always at the recommended level.

See also  2019 Subaru Outback: Unveiling MirrorLink Compatibility and the Future of In-Car Phone Integration

Checking Your Tire Pressure

Before resetting TPMS on your 2019 Subaru Outback, it is important to check your tire pressure. You can do this by following these steps:

  1. Park your vehicle on a level surface and turn off the engine.
  2. Locate the tire pressure information label, which is usually located on the driver’s side door jamb or inside the fuel door.
  3. Remove the valve cap from the tire.
  4. Use a tire pressure gauge to measure the pressure in the tire.
  5. Compare the pressure reading to the recommended pressure on the tire pressure information label.

If the pressure in your tire is lower than the recommended pressure, you should inflate the tire to the recommended pressure. You can do this at a gas station or by using a portable air compressor.

Resetting TPMS on Your 2019 Subaru Outback

Now that you have checked your tire pressure, you can proceed to reset TPMS on your 2019 Subaru Outback. You can do this by following these steps:

  1. Turn the ignition switch to the "On" position.
  2. Locate the TPMS reset button, which is usually located under the steering wheel.
  3. Press and hold the TPMS reset button until the TPMS warning light starts flashing.
  4. Drive your vehicle for at least 20 minutes at a speed of 50 mph or higher.
  5. After driving for 20 minutes, the TPMS warning light should turn off, indicating that TPMS has been reset.

It is important to note that if the TPMS warning light does not turn off, there may be an issue with the TPMS system or the tire pressure in one or more of your tires. In this case, you should consult a professional mechanic to diagnose and fix the issue.

See also  How to Check Transmission Fluid on a 2008 Subaru Outback 🚘

Frequently Asked Questions

Why is my TPMS warning light illuminated?

Your TPMS warning light may be illuminated because the pressure in one or more of your tires is low. It is recommended to check your tire pressure regularly and inflate your tires to the recommended pressure.

Can I reset TPMS without the TPMS reset button?

No, you cannot reset TPMS without the TPMS reset button. The TPMS reset button is a crucial component that is used to reset TPMS on your 2019 Subaru Outback.

How often should I check my tire pressure?

It is recommended to check your tire pressure at least once a month and before long trips. This will help ensure that your tire pressure is always at the recommended level and that TPMS is functioning properly.

What should I do if the TPMS warning light does not turn off after resetting TPMS?

If the TPMS warning light does not turn off after resetting TPMS, there may be an issue with the TPMS system or the tire pressure in one or more of your tires. In this case, you should consult a professional mechanic to diagnose and fix the issue.

In conclusion, resetting TPMS on your 2019 Subaru Outback is a simple process that can be done in a matter of minutes. By following the steps outlined in this article, you can ensure that your TPMS is functioning properly and that your vehicle is safe to drive. Remember to check your tire pressure regularly and to inflate your tires to the recommended pressure to avoid any issues with TPMS.

See also  How Much Should You Really Be Paying for a 2018 Subaru Outback Hatchback? The Surprising Truth Revealed!
Avatar photo

Peter Banks

With years of experience as a professional mechanic and Subaru specialist, Peter is one of the most respected members of our team. He's written several articles on Subaru maintenance and repair, and his advice and tips are always practical and helpful. When he's not working on cars, he enjoys cooking and trying out new recipes.

Recommended Articles