How to Install Remote Starter Subaru Outback: Step-by-Step Guide

Are you tired of getting into a cold car in the winter or a hot car in the summer? A remote starter is the perfect solution for those who want to start their car from the comfort of their home or office. In this article, we will guide you through the process of installing a remote starter on your Subaru Outback.

Key Takeaways

  • A remote starter is a device that allows you to start your car from a distance.
  • Installing a remote starter on your Subaru Outback requires some technical knowledge and may void your warranty.
  • There are different types of remote starters, including one-way, two-way, and smartphone-enabled.
  • The installation process involves finding the right wires, connecting them to the remote starter, and programming the device.

Types of Remote Starters

Before we dive into the installation process, let’s take a look at the different types of remote starters available for your Subaru Outback.

One-Way Remote Starters

One-way remote starters are the most basic type of remote starters. They allow you to start your car from a distance, but they don’t provide any feedback or confirmation that your car has started. You simply press a button on the remote, and your car starts.

See also  How to Replace Cabin Air Filter on a 2001 Subaru Outback

Two-Way Remote Starters

Two-way remote starters are more advanced than one-way remote starters. They provide feedback or confirmation that your car has started. For example, the remote may beep or flash when your car has started. This means you can start your car from a distance and be sure that it has started.

Smartphone-Enabled Remote Starters

Smartphone-enabled remote starters are the most advanced type of remote starters. They allow you to start your car from your smartphone. You can also use your smartphone to lock and unlock your car, check the status of your car, and even locate your car.

Pre-Installation Checklist

Before you begin the installation process, there are a few things you need to check:

  • Make sure you have the right tools for the job. You will need wire strippers, crimpers, pliers, and a voltage meter.
  • Read the instructions that came with your remote starter. Make sure you understand how to connect the wires and program the device.
  • Locate the wires that you need to connect to the remote starter. You can find this information in your car’s manual or by using a wiring diagram.

Installation Process

Now that you have everything you need, it’s time to start installing your remote starter. Follow these step-by-step instructions:

Step 1: Disconnect the Battery

The first step in any car installation is to disconnect the battery. This ensures that you don’t accidentally electrocute yourself while working on your car.

Step 2: Find the Wires

Using your car’s manual or a wiring diagram, locate the wires that need to be connected to the remote starter. These wires are usually located under the dashboard or near the ignition.

See also  DIY Guide: Locating and Changing the Transmission Filter on Your 2003 Subaru Outback

Step 3: Connect the Wires

Using your wire strippers and crimpers, connect the wires from the remote starter to the wires in your car. Make sure you connect the wires according to the instructions that came with your remote starter.

Step 4: Program the Remote Starter

Once you have connected the wires, it’s time to program the remote starter. Follow the instructions that came with your remote starter to program the device.

Step 5: Test the Remote Starter

Now that you have installed and programmed the remote starter, it’s time to test it. Reconnect the battery and test the remote starter by starting your car from a distance.

Tips and Tricks

Here are a few tips and tricks to ensure a successful remote starter installation:

  • Read the instructions carefully before you begin.
  • Make sure you have the right tools for the job.
  • Double-check your connections before you test the remote starter.
  • Test the remote starter several times before you assume that it’s working properly.

Frequently Asked Questions

Can I install a remote starter myself?

Yes, you can install a remote starter yourself if you have the technical knowledge and tools required.

Will installing a remote starter void my warranty?

It’s possible that installing a remote starter could void your warranty. Check with your dealership or manufacturer to see if installing a remote starter will void your warranty.

How far can I start my car with a remote starter?

The range of your remote starter will depend on the type of remote starter you have. One-way remote starters typically have a range of up to 1,000 feet, while two-way remote starters can have a range of up to a mile. Smartphone-enabled remote starters can start your car from anywhere with an internet connection.

See also  How to Replace the CV Axle on Your 2008 Subaru Outback: A Step-by-Step Guide to DIY Maintenance

Conclusion

Installing a remote starter on your Subaru Outback is a great way to start your car from a distance and avoid getting into a cold or hot car. However, it’s important to have the technical knowledge and tools required for the job. Follow the instructions carefully, double-check your connections, and test the remote starter several times before assuming that it’s working properly. With a little patience and know-how, you’ll be enjoying the convenience of a remote starter in no time.

Avatar photo

Peter Banks

With years of experience as a professional mechanic and Subaru specialist, Peter is one of the most respected members of our team. He's written several articles on Subaru maintenance and repair, and his advice and tips are always practical and helpful. When he's not working on cars, he enjoys cooking and trying out new recipes.

Recommended Articles