How to Install 2001 Subaru Outback Reinforced Metal Rocker Panel

Are you looking to install a reinforced metal rocker panel on your 2001 Subaru Outback? This can be a great way to protect your vehicle from rust, damage, and wear and tear. But how do you install a metal rocker panel? In this guide, we will walk you through the process step by step.

Step 1: Gather Your Tools and Materials

Before you begin, you will need to gather the necessary tools and materials to complete the installation. Here are some of the tools you will need:

• Reinforced metal rocker panel
• Drill
• Rivet gun
• Rivets
• Wrench
• Screwdriver
• Safety glasses
• Gloves

Step 2: Prepare Your Vehicle

Next, you will need to prepare your vehicle for installation. Here’s what you should do:

1. Park Your Car in a Safe Space: Ensure that your Subaru is parked in a safe, flat space where you can work comfortably.

2. Remove the Old Rocker Panel: Remove any old rocker panel that is on your vehicle using a wrench or screwdriver.

3. Clean the Area: Thoroughly clean the area where the old rocker panel was installed. This will ensure that there is no dirt, rust, or debris that could interfere with the installation of the new rocker panel.

Step 3: Install the Reinforced Metal Rocker Panel

Now it’s time to install the new rocker panel. Here’s how:

1. Align the Rocker Panel: Place the new reinforced metal rocker panel in place, aligning it with the existing holes on your Subaru Outback.

2. Drill Holes: Using a drill, create new holes where needed in order to make sure the rocker panel fits securely to your vehicle.

3. Apply Rivets: Apply rivets to all holes, using your rivet gun.

4. Tighten Screws: Lastly, use a screwdriver to tighten the screws on the rocker panel to ensure that it is securely in place.

Step 4: Inspect Your Work and Clean Up

After you have finished installing the reinforced metal rocker panel, make sure to inspect your work and clean up the area. Here’s what you should do:

1. Inspect Your Work: Look over your work to ensure that everything is securely in place and your new rocker panel is installed properly.

2. Clean the Area: Clean up any debris, leftover materials or tools that you used during the installation process.

Conclusion

Installing a reinforced metal rocker panel on your 2001 Subaru Outback can provide extra protection from rust and damage. Follow the steps above to install it properly and ensure that it is securely in place. Remember to always take caution when working with tools and equipment.

FAQ

1. Do I need any specialized tools to install a reinforced metal rocker panel on my Subaru Outback?

No, the tools needed are basic and can be found in most households. You will need a drill, rivet gun, wrench, screwdriver, and safety glasses.

2. How long does it take to install a reinforced metal rocker panel on a Subaru Outback?

The installation process can take anywhere from 1-3 hours depending on your level of experience and the condition of the vehicle.

3. Can I install a reinforced metal rocker panel myself or should I hire a professional?

You can install a reinforced metal rocker panel yourself if you have the necessary tools and the ability to follow instructions. However, if you are unsure, it is best to hire a professional to ensure that the installation is done correctly.