Joseph Weaver If you own a 2013 Subaru Outback, you might be wondering how big the drain plug is. The drain plug is an important component of your car’s oil system, and knowing its size can be useful when you’re changing the oil.
In this article, we’ll discuss the size of the drain plug on a 2013 Subaru Outback, how to change the oil on your car, and some tips for maintaining your Subaru Outback’s oil system.
Key Takeaways
- The drain plug on a 2013 Subaru Outback is 14mm.
- Changing your car’s oil at regular intervals is important for maintaining its health and performance.
- It’s important to use the correct oil and oil filter for your car.
- Always refer to your car’s owner’s manual for specific maintenance recommendations.
What is a Drain Plug?
Before we dive into the specifics of the drain plug on a 2013 Subaru Outback, let’s first discuss what a drain plug is and why it’s important. The drain plug is a small, threaded bolt that is located at the bottom of your car’s oil pan. When you’re ready to change your car’s oil, you remove the drain plug to allow the old oil to drain out.
The drain plug is an important component of your car’s oil system because it allows you to remove old, dirty oil and replace it with fresh, clean oil. Over time, oil can become contaminated with dirt, debris, and other contaminants, which can reduce its effectiveness and even cause damage to your car’s engine.
How Big is the Drain Plug on a 2013 Subaru Outback?
Now that you understand the importance of the drain plug, let’s get to the question at hand: how big is the drain plug on a 2013 Subaru Outback? The drain plug on a 2013 Subaru Outback is 14mm in size.
That means when you’re ready to change your car’s oil, you’ll need a 14mm wrench or socket to remove the drain plug. It’s important to use the correct size wrench or socket to avoid damaging the drain plug or the oil pan.
How to Change the Oil on a 2013 Subaru Outback
Changing the oil on your 2013 Subaru Outback is a relatively simple process, but it’s important to follow the correct steps to ensure that you do it properly. Here’s a step-by-step guide to changing the oil on your car:
-
Gather your supplies. You’ll need fresh oil, a new oil filter, a 14mm wrench or socket, an oil filter wrench, a drain pan, and a funnel.
-
Warm up your engine. Start your car and let it run for a few minutes to warm up the engine. Warm oil flows more easily and will drain out of the car more quickly.
-
Drain the oil. Locate the oil drain plug at the bottom of your car’s oil pan. Place your drain pan underneath the plug, then use your 14mm wrench or socket to remove the plug. Allow the oil to drain completely into the pan.
-
Remove the oil filter. Using an oil filter wrench, remove the old oil filter from your car. Make sure to have a rag handy to clean up any oil that spills out.
-
Install the new oil filter. Before installing the new oil filter, lightly coat the rubber gasket with fresh oil. Then, install the new filter by hand until it’s snug. Don’t over-tighten the filter or you may damage it.
-
Add new oil. Using a funnel, add fresh oil to your car through the oil filler cap. Check your car’s owner’s manual to determine the correct type of oil to use and the recommended amount. Once you’ve added enough oil, replace the oil filler cap.
-
Start your engine. Start your car and let it run for a few minutes to circulate the new oil through the engine.
-
Check your oil level. Turn off your car and wait a few minutes for the oil to settle. Then, use your car’s dipstick to check the oil level. Add more oil if necessary.
And that’s it! With just a few simple steps, you can change the oil on your 2013 Subaru Outback and keep it running smoothly.
Tips for Maintaining Your Subaru Outback’s Oil System
Changing your car’s oil regularly is one of the most important things you can do to maintain its health and performance. But there are other things you can do to keep your Subaru Outback’s oil system in top shape:
-
Check your oil level regularly. It’s a good idea to check your car’s oil level every month or so, especially if you drive a lot.
-
Use the correct oil and oil filter. Always refer to your car’s owner’s manual to determine the correct type of oil and oil filter to use.
-
Follow your car’s recommended maintenance schedule. Your car’s owner’s manual will provide recommendations for oil changes, oil filter changes, and other maintenance tasks. Following these recommendations will help keep your car running smoothly.
-
Keep your engine clean. Dirt and debris can accumulate in your car’s engine and oil system, so it’s important to keep everything clean. Regularly clean your engine and change your air filter to help prevent dirt and debris from getting into your car’s oil system.
FAQ
Q: What happens if I don’t change my car’s oil regularly?
A: If you don’t change your car’s oil regularly, old, dirty oil can cause damage to your car’s engine. Over time, oil can break down and become less effective, which can lead to increased engine wear and reduced performance.
Q: How often should I change my Subaru Outback’s oil?
A: The recommended oil change interval for a 2013 Subaru Outback is every 7,500 miles or 7.5 months, whichever comes first. However, you may need to change your oil more frequently if you drive in extreme conditions, such as very hot or very cold weather.
Q: Can I change my car’s oil myself?
A: Yes, changing your car’s oil is a relatively simple process that can be done at home with the right tools and supplies. However, if you’re not comfortable working on your car, it’s always a good idea to take it to a professional mechanic.
Q: Is it important to use synthetic oil in my Subaru Outback?
A: Synthetic oil can provide better performance and protection for your car’s engine than conventional oil. However, it’s always important to refer to your car’s owner’s manual to determine the correct type of oil to use.
