If you own a Subaru Legacy, it’s essential to know where the tow hook is located. In an emergency situation, you may need to tow your car to a mechanic, a safer location, or get rescued out of a tricky situation. Therefore, it’s essential to know how to locate and use the tow hook properly.
This article will guide you through the process of finding the tow hook on a Subaru Legacy. But first, let’s understand what a tow hook is and its purpose.
What is a Tow Hook?
A tow hook is a metal device usually attached to the front and rear bumper of a vehicle. It serves the purpose of allowing easy and safe towing of a car. Tow hooks can be of various types, such as a fixed threaded stud, a removable hook, or a folding design.
The tow hook can be used in the following situations:
- Towing the vehicle to a safer location if it breaks down.
- Dragging the car out of a ditch or mud.
- Towing the car to a service center.
As a Subaru Legacy owner, it’s vital to know the location of its tow hook.
How to Find the Subaru Legacy Tow Hook?
Subaru Legacy owners can find the tow hook in the front of the vehicle behind the cover of the bumper on the passenger side of the car. The cover can be removed by gently pulling it outwards.
Once you’ve removed the cover, you’ll see a threaded hole where the tow hook is installed. You can then attach the tow hook and use it to tow your vehicle.
It’s crucial to note that each Subaru Legacy comes with a tow hook, so you don’t have to purchase it separately. The tow hook’s thread size may differ depending on the model year, so make sure to check your car’s user manual to get the right size tow hook.
Here are the steps in detail:
- Open the hood of your car and locate the cover of the front bumper.
- Firmly but gently pull the cover outwards from the passenger side of the car.
- After removing the cover, you’ll see a threaded hole where the tow hook is installed. The location is usually close to the headlight assembly.
- Take the tow hook and screw it into the threaded hole.
- Once the tow hook is screwed in, you can use it to tow your car.
It’s always a good idea to practice attaching and removing the tow hook in a dry and safe place when you don’t need to use it so that you become comfortable with the process.
Different Types of Tow Hooks
Subaru Legacy owners can benefit from various types of tow hooks. Some tow hooks are designed specifically for racing purposes, while others are meant for everyday use.
Here are the three types of tow hooks available for the Subaru Legacy:
Screw-in Hook: It’s the most common type of tow hook, and it screws directly into the bumper. It usually comes in a bright color, making it easier to spot in an emergency.
Removable Hook: This hook is easy to install and remove. It attaches to the towing eyelets on the chassis.
Folding Hook: This hook folds away when not in use, making it less noticeable and less likely to cause damage.
Q. Do I need to purchase a tow hook separately for my Subaru Legacy?
No. Every Subaru Legacy comes with a tow hook, so you don’t have to buy it separately.
Q. Can I use any type of tow hook on my Subaru Legacy?
No. You have to use the correct size and type of tow hook recommended by Subaru for your vehicle.
Q. Where is the rear tow hook located?
The rear tow hook of the Subaru Legacy is located under the rear bumper cover.
Knowing the location of the tow hook in your Subaru Legacy is essential for your safety and the safety of others. We hope this article has helped you understand the importance of locating and using the tow hook properly. Remember to practice the process of attaching and removing the tow hook in a safe and dry place to become comfortable with the process. Stay safe on the road!