How to Reset Oil Change Monitor on Subaru Legacy ๐Ÿš—๐Ÿ’ก

If you own a Subaru Legacy, you know how important it is to perform regular maintenance to keep your vehicle running smoothly. One component of this maintenance is changing your oil at regular intervals. To help you stay on track with your oil changes, your Subaru Legacy is equipped with an oil change monitor that alerts you when it’s time for a change.

But what if you’ve changed your oil and the monitor is still telling you to do so? In this article, we’ll walk you through the steps to reset your oil change monitor on a Subaru Legacy.

Key Takeaways ๐Ÿงพ

  • The oil change monitor on your Subaru Legacy helps you stay on track with regular maintenance.
  • Sometimes, the monitor needs to be manually reset after an oil change.
  • Resetting the monitor is easy and can be done in just a few steps.

Step-by-Step Guide ๐Ÿ“

Follow these simple steps to reset your oil change monitor on a Subaru Legacy:

See also  The Ultimate Guide to Choosing the Best Stereo for your Subaru Legacy 2015: Upgrade Your Sound Quality Now!

Step 1: Turn on the Ignition ๐Ÿ”‘

Before you can reset your oil change monitor, you’ll need to turn on your vehicle’s ignition. Make sure your Subaru Legacy is in park and that the emergency brake is engaged.

Step 2: Navigate to the Trip Button ๐Ÿ›ฃ๏ธ

Next, locate the trip button on your Subaru Legacy’s dashboard. This button is usually located near the speedometer and odometer.

Step 3: Press and Hold the Trip Button ๐Ÿ“Ÿ

Once you’ve located the trip button, press and hold it down. While holding the button, turn your vehicle’s ignition to the "on" position. Do not start the engine.

Step 4: Wait for the Oil Change Light to Blink ๐Ÿšจ

After a few seconds, the oil change light on your Subaru Legacy’s dashboard will begin to blink. Continue holding the trip button until the light stops blinking and turns off completely.

Step 5: Release the Trip Button ๐Ÿšฆ

Once the oil change light has turned off, release the trip button.

Step 6: Turn Off the Ignition ๐Ÿ”‘

Finally, turn off your Subaru Legacy’s ignition. The oil change monitor has now been reset, and your vehicle will no longer display an alert for an oil change.

Frequently Asked Questions โ“

How often should I change the oil on my Subaru Legacy?

Subaru recommends changing the oil in your Legacy every 6,000 miles or 6 months, whichever comes first.

Do I need to reset my oil change monitor after every oil change?

No, the oil change monitor on your Subaru Legacy should reset automatically after an oil change. However, if the monitor does not reset, follow the steps outlined in this article.

See also  How to Replace Head Gasket on a 2012 Subaru Legacy: A Comprehensive Guide

What happens if I don’t change the oil on my Subaru Legacy?

Failing to change the oil in your Subaru Legacy can lead to engine damage and reduced performance. It’s important to stay on track with regular oil changes to keep your vehicle running smoothly.

Conclusion ๐Ÿ

If you’ve recently changed the oil on your Subaru Legacy and the oil change monitor is still displaying an alert, don’t worry. Follow the simple steps outlined in this article to reset the monitor and ensure that your vehicle stays on track with regular maintenance. By staying on top of your oil changes, you can help your Subaru Legacy perform at its best for years to come.

Avatar photo

Davis Bellew

As a Subaru owner and enthusiast, Davis has a deep understanding of the needs and concerns of Subaru drivers. He specializes in writing informative and engaging content about Subaru maintenance and repair, and his articles are always well-researched and easy to understand. When he's not writing, he enjoys hiking and photography.

Recommended Articles