Joseph Weaver If you have a 2010 Subaru Legacy, you may need to change the taillight at some point. Whether the taillight is cracked, broken, or simply burned out, it is important to replace it as soon as possible to ensure your safety on the road. Fortunately, changing the taillight on a 2010 Subaru Legacy is a relatively easy process that can be done at home with just a few tools and materials. In this article, we will guide you through the process of changing the taillight on a 2010 Subaru Legacy.
Materials Needed:
- New taillight assembly
- Socket wrench
Step-by-Step Guide:
Step 1: Purchase a New Taillight Assembly
Before you begin the process of changing the taillight on your 2010 Subaru Legacy, you will need to purchase a new taillight assembly. You can purchase a taillight assembly from your local auto parts store or online. Make sure to purchase the correct assembly for your vehicle.
Step 2: Remove the Old Taillight Assembly
Once you have your new taillight assembly, you can begin the process of removing the old taillight. To do this, you will need to locate the taillight on the back of your vehicle. It is located on the outer edge of the rear bumper.
Use your socket wrench to remove the bolts holding the taillight assembly in place. Make sure to keep these bolts in a safe place so you don’t lose them.
Once the bolts are removed, gently pull the taillight assembly away from the vehicle. It may be helpful to have someone else hold the taillight assembly while you disconnect the wiring harness.
Step 3: Disconnect the Wiring Harness
To disconnect the wiring harness, you will need to locate the clip that is holding the wiring harness in place. Use your fingers to press down on the clip and gently pull the wiring harness away from the taillight assembly.
Step 4: Install the New Taillight Assembly
Now that you have removed the old taillight assembly, you can begin installing the new one. To do this, simply align the new taillight assembly with the holes where the bolts were removed.
Once the taillight assembly is in place, use your socket wrench to secure the bolts back into place. Make sure to tighten the bolts snugly, but not too tight to avoid damaging the taillight assembly.
Step 5: Reconnect the Wiring Harness
To reconnect the wiring harness, simply push the clip back into place until you hear it click. Make sure the wiring harness is secure and will not come loose while driving.
Step 6: Test the New Taillight
Before driving your vehicle, it is important to test the new taillight to make sure it is working properly. Turn on your headlights and check all of the lights on the back of your vehicle, including the taillights, brake lights, and turn signals.
If the new taillight is working properly, you can clean up your work area and dispose of the old taillight assembly. Congratulations, you have successfully changed the taillight on your 2010 Subaru Legacy!
Frequently Asked Questions (FAQ):
How long does it take to change a taillight on a 2010 Subaru Legacy?
Changing the taillight on a 2010 Subaru Legacy should take no more than 30 minutes, assuming you have all the necessary tools and materials.
What tools do I need to change a taillight on a 2010 Subaru Legacy?
To change the taillight on a 2010 Subaru Legacy, you will need a new taillight assembly and a socket wrench.
Can I change a taillight on a 2010 Subaru Legacy myself?
Yes, changing a taillight on a 2010 Subaru Legacy is a relatively easy process that can be done at home with just a few tools and materials.
How much does it cost to replace a taillight on a 2010 Subaru Legacy?
The cost of replacing a taillight on a 2010 Subaru Legacy will vary depending on where you purchase the taillight assembly and if you plan to do the installation yourself. On average, the cost of a taillight assembly will range from $50 to $150.
