Alton Brobst Changing brake pads is an important part of maintaining your vehicle’s safety and performance. If you’re driving a 2015 Subaru Legacy, it’s essential to know how to change the rear brake pads as they are integral to stopping your vehicle.
In this article, we will guide you through the process of changing the rear brake pads on a 2015 Subaru Legacy. We will cover all the necessary steps and provide tips to make the process easier. So, let’s dive in!
Key Takeaways 🚀
- Changing your brake pads regularly can help maintain your vehicle’s safety and performance.
- Rear brake pads on a 2015 Subaru Legacy should be changed every 50,000 miles.
- Before changing your brake pads, make sure you have all the necessary tools and equipment.
- Follow the manufacturer’s instructions and use high-quality brake pads for the best results.
Things You Will Need 🛠️
Here’s a list of the tools and equipment you will need before you begin:
- A jack and jack stands
- Lug nut wrench
- A wrench or ratchet set
- A C-clamp
- Brake cleaner
- New brake pads
- New brake rotors (optional)
- Grease
Step-by-Step Guide 📝
Now that you have all the necessary tools and equipment, let’s get started with the process of changing the rear brake pads on the 2015 Subaru Legacy:
Step 1: Prepare Your Vehicle 🚘
- Make sure your vehicle is on a level surface and the parking brake is engaged.
- Loosen the lug nuts on the rear wheels before jacking up the vehicle.
- Use a jack and lift the rear of the car until the tires are off the ground.
- Support the vehicle on jack stands before removing the lug nuts and wheels.
Step 2: Remove the Brake Caliper 🛑
- Locate the brake caliper and remove the two bolts holding it in place.
- Carefully remove the brake caliper and set it aside.
- Do not let the caliper hang by the brake line.
Step 3: Remove the Old Brake Pads 🔧
- Remove the old brake pads by sliding them out of the caliper.
- Use a C-clamp to compress the piston back into the caliper.
- This will make room for the new brake pads.
Step 4: Install the New Brake Pads 🆕
- Apply a small amount of grease to the back of the new brake pads.
- Slide the new brake pads into the caliper.
- Make sure the brake pads are properly seated in the caliper.
Step 5: Reinstall the Brake Caliper 💪
- Reinstall the brake caliper onto the rotor.
- Tighten the two bolts that hold the caliper in place.
- Make sure the brake caliper is aligned properly before tightening the bolts.
Step 6: Reinstall the Wheels 🔄
- Put the wheels back onto the vehicle and tighten the lug nuts.
- Use a torque wrench to ensure that the lug nuts are properly tightened.
- Lower the vehicle back onto the ground.
Step 7: Test Your Brakes 🚦
- Pump the brake pedal a few times to restore the pressure.
- Check the brake fluid level and add more if necessary.
- Test your brakes by driving the vehicle around the block at low speeds to ensure they are working properly.
FAQs 🤔
How often should I change my brake pads on a 2015 Subaru Legacy?
Rear brake pads on a 2015 Subaru Legacy should be changed every 50,000 miles. However, it is always a good idea to check them regularly for wear and tear.
Do I need to replace the brake rotors when changing the brake pads?
It is not necessary to replace the brake rotors every time you change the brake pads. However, if the rotors are worn or damaged, it is highly recommended to replace them at the same time.
Can I change the brake pads myself?
Yes, you can change the brake pads yourself if you have the necessary tools and equipment. However, if you are not comfortable working on your vehicle, it is best to take it to a professional mechanic.
Final Thoughts 🏁
Changing the rear brake pads on a 2015 Subaru Legacy is a relatively simple process that can be done in your own garage. It is important to follow the manufacturer’s instructions and use high-quality brake pads for the best results. Regular maintenance of your vehicle’s brakes can ensure your safety and the longevity of your vehicle. So, make sure to inspect and change your brake pads regularly.
