Joseph Weaver If you are a driver, you know how important it is to have all the lights on your car functioning properly, and the brake light is no exception. A damaged or broken brake light can be a danger on the road, increasing the risk of accidents. In this article, we will show you how to change the brake light on your 2009 Subaru Impreza, and make it easy for you to follow.
Key Takeaways
- It is essential to check all the lights on your car periodically to ensure they are functioning properly.
- A broken or damaged brake light can be a danger on the road, increasing the risk of accidents.
- Changing the brake light on your 2009 Subaru Impreza is relatively easy and can be done at home with minimal tools.
Materials Needed
- Replacement brake light bulb
- Latex gloves (optional)
- Screwdriver
- Towel or cloth
Step-by-Step Instructions
- Locate the brake light assembly
The brake light assembly on a 2009 Subaru Impreza is located on the rear of the car, just above the license plate. You will need to open the trunk to access it.
- Remove the brake light assembly cover
There is a plastic cover over the brake light assembly that needs to be removed. To do this, locate the two screws or clips that hold it in place and remove them with a screwdriver.
🔧 Pro Tip: Use latex gloves to avoid getting fingerprints on the new bulb.
- Remove the old brake light bulb
Now that the cover is removed, you can see the brake light bulb. Gently twist the bulb counterclockwise to remove it from the socket. Be careful not to break the bulb or the socket.
- Install the new brake light bulb
Take the new brake light bulb and insert it into the socket. Gently twist the bulb clockwise to lock it into place.
- Test the new bulb
Before replacing the cover, test the brake light to ensure the new bulb is working. Have someone press the brake pedal while you stand behind the car to see if the new bulb lights up.
- Replace the cover
If the new bulb is working correctly, replace the plastic cover on the brake light assembly. Secure it with the screws or clips you removed in step 2.
- Clean up
Once you have finished changing the brake light bulb, clean up any tools and put them away. Don’t forget to close the trunk!
Congratulations! You have successfully changed the brake light on your 2009 Subaru Impreza.
Frequently Asked Questions (FAQs)
Q: Why is it important to change a brake light?
A: It’s essential to change a brake light to ensure that all the lights on your car are functioning properly, and to avoid accidents on the road.
Q: How often should I check the lights on my car?
A: We recommend checking the lights on your car at least once a month.
Q: Can I change the brake light on my Subaru Impreza without any tools?
A: No, you will need a screwdriver to remove the plastic cover on the brake light assembly.
Q: What if the new bulb doesn’t work?
A: If the new bulb doesn’t work, check the socket and wiring to ensure there are no issues there. If everything looks good, try replacing the bulb again.
Conclusion
In conclusion, changing the brake light on your 2009 Subaru Impreza is relatively easy and can be done at home with minimal tools. Remember to check all the lights on your car periodically to ensure they are functioning correctly, and to avoid accidents on the road. By following the steps outlined in this article, you can change the brake light on your Subaru Impreza in no time.
