Owning a car comes with a lot of responsibility, one of which is ensuring that all safety components are functioning optimally. The tail light is one such component, and it plays a crucial role in ensuring that you are visible to other drivers on the road, especially at night.
In this DIY guide, we will take you through the steps involved in replacing the tail light on your 2015 Subaru Impreza. Whether you are a DIY enthusiast or a regular car owner, this guide will equip you with the necessary knowledge and tools to get the job done quickly and efficiently.
Before we dive into the procedure, let’s first go over the tools you will need to replace the tail light on your 2015 Subaru Impreza. These tools include:
- A screwdriver
- Needle nose pliers
- A replacement tail light assembly
- Latex gloves (optional)
The first step is to open the trunk and locate the backside of the tail light assembly. You will notice two screws holding the assembly in place. Use a screwdriver to unscrew them.
After unscrewing, the tail light assembly should be loose but still attached by a couple of clips. Gently pull the assembly away from the body of the car. To remove it entirely, unclip it from the wiring harness.
With the old tail light assembly out of the way, you can now install the new one. Start by plugging in the new tail light’s wiring harness, matching up its clip with the old wiring harness.
Once the new tail light assembly is in place, screw in the two screws removed in step one to hold it firmly in place.
Finally, test the new tail light to ensure it is functioning correctly. Have a friend stand outside your car while you activate the tail lights to confirm that everything is in order.
As always, when working on your car, safety should be a top priority. Follow these simple safety precautions:
- Always put on latex gloves to protect your hands from cuts or injuries.
- Avoid touching the glass portion of the new tail light with bare hands to prevent leaving fingerprints or smudges.
- Before you start, ensure that your car is parked on a level surface and that the engine is turned off.
Sometimes, car components can be fickle, and the tail light is no exception. Here are some troubleshooting tips to consider if your new tail light fails to function:
- Check the wiring connections to make sure they are secure and plugged in correctly.
- Ensure that you bought the right replacement part for your car. It’s important to ensure that the part you purchased is compatible with your 2015 Subaru Impreza model.
- Check the fuses in your car to ensure they are not blown or damaged.
Q. Can I replace a tail light on my 2015 Subaru Impreza myself?
Yes, you can. By following the procedure outlined above and with the right tools, it’s possible to replace the tail light on your 2015 Subaru Impreza by yourself.
Q. How much does it cost to replace a tail light on a 2015 Subaru Impreza?
The cost of replacing a tail light on a 2015 Subaru Impreza will vary depending on where you buy the new tail light assembly. It could range from $70 to $100.
Q. What should I do if my new tail light still doesn’t work after replacement?
Double-check all the wiring connections to make sure they are secure and plugged in correctly. If the problem persists, it’s advisable to consult a professional mechanic for help.
Changing your car’s tail light may seem like a small task. However, it plays an essential role in ensuring that you are safe on the road. By following this guide and doing the procedure yourself, you can save on costs and keep your 2015 Subaru Impreza in top shape. Remember always to prioritize safety and take the necessary precautions when doing any DIY work on your vehicle.