If you own a 2010 Subaru Forester, you may be wondering where the TPMS reset switch is located. The TPMS reset switch is used to reset the Tire Pressure Monitoring System (TPMS) in case of a tire pressure issue. In this article, we will explore the location of the TPMS reset switch and provide step-by-step instructions on how to reset the TPMS system.
Location of the TPMS Reset Switch
The TPMS reset switch on a 2010 Subaru Forester is located under the steering wheel. Here’s how to locate it:
- Sit in the driver’s seat of your Subaru Forester and make sure the doors are closed.
- Look under the steering wheel and locate a small button or switch.
- The TPMS reset switch is usually labeled with a TPMS icon, which looks like an exclamation point inside a tire.
Once you have located the TPMS reset switch, you’re ready to reset the TPMS system.
How to Reset the TPMS System
Resetting the TPMS system on a 2010 Subaru Forester is a straightforward process. Here are the steps to follow:
- Make sure all tires are properly inflated to the manufacturer’s recommended pressure. You can find this information on the tire pressure label located on the driver’s side door jamb.
- Turn the ignition switch to the ON position, but do not start the engine.
- Press and hold the TPMS reset switch for at least three seconds. You should see the TPMS warning light blink twice.
- Release the TPMS reset switch.
- Start the engine and let it run for at least 20 minutes to allow the TPMS system to recalibrate.
Congratulations, you have successfully reset the TPMS system on your 2010 Subaru Forester.
In some cases, the TPMS warning light may not turn off after you have reset the TPMS system. If this happens, you may need to take your Subaru Forester to a qualified technician to have the system checked.
It is also important to note that resetting the TPMS system will not fix a tire pressure issue. If you continue to experience low tire pressure, you may have a puncture or leak that needs to be repaired. It is always a good idea to visually inspect your tires regularly for any signs of damage or wear.
Frequently Asked Questions
Q: Why do I need to reset the TPMS system?
A: The TPMS system is designed to alert you if your tire pressure is too low. If you adjust your tire pressure or change your tires, you will need to reset the TPMS system to ensure that it is calibrated correctly.
Q: Can I reset the TPMS system myself?
A: Yes, you can reset the TPMS system yourself using the TPMS reset switch located under the steering wheel. Just make sure to follow the steps outlined in this article.
Q: What should I do if the TPMS warning light doesn’t turn off after I’ve reset the system?
A: If the TPMS warning light remains on even after you’ve reset the system, you may need to take your Forester to a qualified technician to have the system checked.