Ultimate Guide to Removing Your Subaru Forester Back Seat for Extra Cargo Space

If you’re someone looking to customize your Subaru Forester, remove a back seat for extra cargo space, or simply need room for more passengers, you may need to know how to remove the back seat. It may seem daunting at first, but with the right tools and instructions, it’s a straightforward process that can be done with ease. In this article, we’ll provide you with a step-by-step guide to remove the back seat of your Subaru Forester.

Preparation

Before you begin, there are a few things you need to keep in mind. Firstly, ensure that you have the right tools for the job. You’ll need a set of socket wrenches, a pair of pliers, and a flathead screwdriver. If possible, try to have someone else help you with this process as removing the back seat can be quite heavy.

Next, ensure that you take the necessary precautions and safety measures. Always wear gloves and safety gear and be careful when handling sharp or heavy parts.

Steps to remove the back seat

1. Start by pulling the seatback forward.
2. Locate and remove the two bolts that hold the seatback in place. They’re usually located at the base of the seatback brackets.
3. Pull the seatback up and out of the brackets.
4. Now it’s time to remove the seat base. Start by pulling the front edge of the seat base upwards to release the clips that hold it in place.
5. Grab the handle of the seat base release lever, located at the back of the seat base on the passenger side, and pull it upwards. This will release the seat retention clips.
6. Lift the back of the seat base and wiggle it until it releases the clips, then lift and pull it out of the car.

And that’s it! You’ve successfully removed the back seat of your Subaru Forester.

Tips and Tricks

• Consider labeling the bolts and screws or creating a map to remember where they go when it comes time to reattach the seat.
• If you have trouble lifting the seat base, try pushing the seat release lever down while lifting up on the seat.
• Clean and vacuum the area under the seat while it’s removed for some extra maintenance.

Re-Installation

To reattach the seat, follow these steps:

1. Align the hooks with the retaining clips and insert the seat base. Ensure it clicks into place.
2. Push the front of the seat down to secure the base clips in place.
3. Put the seatback into the brackets and put the bolts back in.
4. Tighten the bolts securely but do not overtighten.
5. Test the seat to make sure it’s secure and comfortable before use.

FAQ

1. Can I remove the back seat of my Subaru Forester on my own?

Yes, you can. Follow our guide step-by-step, and you’ll be able to do it easily.

2. How much time will it take to remove the back seat?

It should take about 30 minutes to an hour, depending on your familiarity with the car and the tools at hand.

3. Will removing the seat cause any damage to the car?

No, it won’t cause any damage to the car if done correctly. Just ensure that you follow all necessary precautions and use the right tools.

4. Can I remove the back seat temporarily?

Yes, you can. Just follow the steps mentioned above and reinstall the seat when you’re done.

Conclusion

Removing the back seat of your Subaru Forester can be an easy process when you have the right tools and instructions. With the information we’ve provided, you can customize your vehicle, create extra cargo space, or transport more passengers. Always take the necessary precautions and safety measures while doing any DIY work. We hope this comprehensive guide has been helpful.