Billy Covington Are you having trouble setting the clock on your Subaru Forester 2016? Don’t worry; it’s a common issue faced by many Forester owners. In this step-by-step guide, we will walk you through the process of setting the dashboard clock on your Forester 2016.
Locating the Clock Setting Button on the Dashboard
The clock setting button on the dashboard of a Subaru Forester 2016 is usually situated near the sound system controls and is labeled "Clock." It is a small button that may be challenging to spot if you’re new to the car. Look for a button with "Clock" written on it, and press it to begin changing the clock time.
How to Adjust the Hour and Minute Settings
Once you have located the clock setting button, press and hold it for a few seconds. This action will cause the clock digits to start flashing, indicating you’re in the clock-setting mode. Release the button when the flashing starts.
The flashing digits indicate the hours – use the button beside the clock button to adjust the hours until you reach the required time. If you pass the desired time while scrolling, don’t worry; keep holding the button, and the time will wrap around back to 1:00.
After setting the hours, press the clock setting button once to enter the minute flashing mode. Similar to the hour-adjusting mode, adjust the minutes using the adjacent scroll button. Keep in mind that the minute adjustment is within increments of five minutes, so be patient with the scrolling.
Common Issues When Setting the Clock on Forester
Sometimes, the clock on the Forester dashboard may not reset to the correct time, even after following the steps mentioned above. When this occurs, ensure that the car battery is in good condition and charged adequately. If the car battery is OK, then the problem may be because daylight saving time is operational.
If daylight saving time is the issue, disable the daylight saving time setting and correct for the time difference manfully. You can also refer to the car manual for detailed instructions on how to adjust to daylight saving time.
Frequently Asked Questions (FAQs)
-
Q: I’m new to the Forester. How can I reset the clock to the correct time after changing the car battery?
- Ans: Press and release the clock setting button in the dashboard until the flashing digits indicate the current time, then adjust as required.
-
Q: Does the Forester dashboard clock automatically adjust for daylight saving time?
- Ans: No, it does not. You need to manually adjust the clock to account for daylight saving time.
-
Q: I cannot find the clock setting button on my Forester dashboard. Where should I look?
- Ans: The clock button is typically situated near the sound system controls. Look for a small button marked "Clock."
In conclusion, setting the clock on a Subaru Forester 2016 may seem challenging at first, but following the instructions mentioned above should make the process easy and straightforward. If you’re still having trouble, make sure to check your car manual or consult a mechanic. Happy driving!
