How to Remove Rear Windshield Wiper Subaru Forester 2011: A Comprehensive Guide

If you own a Subaru Forester 2011, you may have noticed that the rear windshield wiper has been damaged or needs to be replaced. Removing the rear windshield wiper is a simple process that you can do yourself, without needing to go to a mechanic or spend money on professional services. In this article, we will provide you with a step-by-step guide on how to remove the rear windshield wiper from your Subaru Forester 2011.

Key Takeaways

• Removing the rear windshield wiper from your Subaru Forester 2011 is a simple process that you can do yourself.
• You will need a few tools, including a wrench, a flat-head screwdriver, and a pair of pliers.
• The process involves removing the wiper arm, the wiper blade, and the wiper motor cover.

Tools Needed

Before we get started, you will need a few tools to remove the rear windshield wiper from your Subaru Forester 2011. Here are the tools you will need:

• Wrench
• Flat-head screwdriver
• Pliers

Step-by-Step Guide

Follow these steps to remove the rear windshield wiper from your Subaru Forester 2011:

Step 1: Remove the Wiper Arm

The first step is to remove the wiper arm from your Subaru Forester 2011. Here’s how to do it:

1. Lift the wiper arm away from the rear windshield until it is in a vertical position.
2. Use a wrench to loosen the nut that holds the wiper arm in place. Turn the nut counterclockwise until it is loose enough to remove by hand.
3. Once the nut is loose, use a flat-head screwdriver to gently pry the wiper arm away from the wiper motor shaft. Be careful not to damage the wiper motor or the rear windshield.

🔧 Pro Tip: If the wiper arm is stuck, use a pair of pliers to gently wiggle it back and forth until it comes loose.

Step 2: Remove the Wiper Blade

The next step is to remove the wiper blade from the wiper arm. Follow these steps:

1. Lift the wiper blade away from the wiper arm until it is in a vertical position.
2. Locate the small tab on the underside of the wiper blade where it attaches to the wiper arm.
3. Use a flat-head screwdriver to gently pry the tab away from the wiper arm until the wiper blade is loose.
4. Once the tab is loose, slide the wiper blade off the wiper arm.

🔧 Pro Tip: If the wiper blade is stuck, use a pair of pliers to gently wiggle it back and forth until it comes loose.

Step 3: Remove the Wiper Motor Cover

The final step is to remove the wiper motor cover. Here’s how to do it:

1. Locate the wiper motor cover at the base of the wiper arm.
2. Use a flat-head screwdriver to gently pry the wiper motor cover away from the wiper motor assembly.
3. Once the cover is loose, carefully remove it from the wiper motor assembly.

🔧 Pro Tip: Be sure to keep the wiper motor cover in a safe place so that you can easily reattach it later.

FAQ

1. Do I need to remove the rear windshield wiper to replace the wiper blade?

   • Yes, you will need to remove the rear windshield wiper to replace the wiper blade.

2. Can I remove the wiper blade without removing the wiper arm?

   • No, you will need to remove the wiper arm before you can remove the wiper blade.

3. How do I reattach the wiper arm to the wiper motor shaft?

   • To reattach the wiper arm to the wiper motor shaft, simply slide the arm back onto the shaft and tighten the nut with a wrench.

Conclusion

Removing the rear windshield wiper from your Subaru Forester 2011 is a simple process that you can do yourself with a few basic tools. By following the step-by-step guide we’ve provided, you can easily remove the wiper arm, the wiper blade, and the wiper motor cover. We hope this guide has been helpful and has made it easy for you to remove the rear windshield wiper from your Subaru Forester 2011.