Joseph Weaver If you are experiencing issues with your climate control on your 2017 Subaru Forester, you may be considering removing the unit for inspection or replacement. Removing the climate control unit can be a daunting task, but with the right tools and some patience, it can be done. In this article, we will guide you through the steps required to remove the climate control unit on your 2017 Subaru Forester.
Key Takeaways:
- Removing the climate control unit on the 2017 Subaru Forester requires some basic tools such as a screwdriver and a trim removal tool.
- Disconnecting the battery before removing the climate control unit is an important safety precaution.
- The climate control unit is attached to the dash with several screws and clips, which need to be removed before the unit can be taken out.
Tools Required:
- Screwdriver
- Trim removal tool
Step-by-step Guide:
-
Disconnect the battery. Before you start removing the climate control unit, it is important to disconnect the battery to prevent any electrical accidents.
-
Remove the center console trim. Remove the center console trim by inserting a trim removal tool between the trim and the dash and gently prying the trim away from the dash. There are several retaining clips holding the trim in place, so be careful not to break them.
-
Remove the radio. After removing the center console trim, you will need to remove the radio. To do this, locate the four screws holding the radio in place and remove them with a screwdriver. Once the screws are removed, gently pull the radio out of the dash.
-
Remove the climate control unit. After removing the radio, you should be able to see the climate control unit. The unit is held in place with several screws, so use a screwdriver to remove them. Once the screws are removed, gently pull the unit out of the dash.
-
Disconnect the wiring harnesses. Before completely removing the climate control unit, you will need to disconnect the wiring harnesses. There are several wiring harnesses connected to the unit, so be sure to label them before disconnecting.
-
Remove the climate control unit. Once the wiring harnesses are disconnected, you can remove the climate control unit completely from the dash.
FAQ:
Q: Is it necessary to disconnect the battery before removing the climate control unit?
A: Yes, it is important to disconnect the battery to prevent any electrical accidents.
Q: Can I remove the climate control unit without removing the radio?
A: No, you will need to remove the radio first before you can access the climate control unit.
Q: Are there any special tools required to remove the climate control unit?
A: No, only basic tools such as a screwdriver and a trim removal tool are required.
Q: Do I need to label the wiring harnesses before disconnecting them?
A: Yes, it is important to label the wiring harnesses to ensure they are reconnected correctly.
