Peter Banks If you own a 2017 Subaru Forester, it’s important to check your CVT fluid regularly to ensure that your transmission system is running smoothly. This guide will walk you through the process of checking your CVT fluid, step-by-step.
Key Takeaways 📝
- Checking CVT fluid in your 2017 Subaru Forester is essential to maintaining your transmission system
- You should check your CVT fluid every 30,000 miles
- You need to have your car parked on a level surface before checking CVT fluid
- The CVT fluid should be checked while the engine is running
Step-by-Step Guide 📝
Here are the steps you need to follow to check your CVT fluid in a 2017 Subaru Forester:
Step 1: Park Your Car on a Level Surface 🚗
It’s important to ensure that your car is parked on a level surface before checking your CVT fluid. This ensures that your reading is accurate.
Step 2: Run Your Engine 🚀
Start your engine and let it run for a few minutes. This warms up the fluid and ensures an accurate reading.
Step 3: Locate the CVT Dipstick 🧐
Your 2017 Subaru Forester should have a CVT dipstick located near the front of the engine compartment. It’s usually marked with a yellow handle.
Step 4: Check the CVT Fluid Level 📈
Remove the dipstick from the CVT fluid reservoir and wipe it clean with a lint-free cloth or paper towel. Reinsert the dipstick and remove it again to check the fluid level. The fluid level should be between the "low" and "full" marks on the dipstick.
Step 5: Add Fluid if Necessary 🆘
If the fluid level is low, you’ll need to add more CVT fluid. Make sure you use the right type of fluid for your Forester, which should be listed in your owner’s manual. Add the fluid through the same tube where you removed the dipstick. Be sure not to overfill the reservoir.
Step 6: Recheck the Fluid Level 🔄
Once you’ve added fluid, recheck the fluid level using the same dipstick. Repeat the process until the fluid level is in the correct range.
FAQ ❓
How often should I check my CVT fluid?
You should check your CVT fluid every 30,000 miles.
Can I check my CVT fluid while the engine is off?
No, you need to check your CVT fluid while the engine is running.
What type of fluid should I use for my Subaru Forester?
Your owner’s manual should list the recommended type of CVT fluid for your Forester.
Should I check my CVT fluid when the engine is hot or cold?
You should check your CVT fluid while the engine is warm and running. This ensures an accurate reading.
What should I do if my CVT fluid level is low?
If your CVT fluid level is low, you’ll need to add more fluid. Make sure you use the recommended type of fluid for your Forester and don’t overfill the reservoir.
Conclusion 🎉
Now that you know how to check your CVT fluid in your 2017 Subaru Forester, you can make sure your transmission system is running smoothly. Remember to check your CVT fluid every 30,000 miles and use the recommended type of fluid for your Forester. If you’re ever unsure about how to check or add CVT fluid, consult your owner’s manual or take your car to a professional mechanic for assistance.
