Joseph Weaver If you’re looking for a guide on how to change the multifunction display in your Subaru Forester 2015, you have come to the right place. The multifunction display is an essential part of your vehicle as it provides you with important information such as fuel levels, speed, and engine performance. In this guide, we will walk you through the steps to change the multifunction display in your Subaru Forester 2015.
Key Takeaways
- The multifunction display is an essential part of your Subaru Forester 2015.
- Changing the multifunction display is a simple process that can be done with the right tools and knowledge.
- It is important to take precautions to avoid damaging the display or other parts of your vehicle during the replacement process.
Tools and Materials Needed
Before we get started, here are the tools and materials you’ll need:
- A new multifunction display
- A set of screwdrivers
- A trim removal tool (optional)
- A pair of gloves (optional)
- A clean, flat surface to work on
Step-by-Step Guide
Follow these steps to change the multifunction display in your Subaru Forester 2015:
Step 1: Turn off the ignition
Before you begin working on your vehicle, it is crucial to turn off the ignition and disconnect any electrical connections to avoid any potential electrical hazards.
👉 Tip: It is recommended to disconnect the negative battery cable to prevent accidental electrical discharge.
Step 2: Remove the old multifunction display
Use a screwdriver or a trim removal tool to remove the trim panel that surrounds the display. Once the trim panel is removed, you’ll see the screws that attach the display to the dashboard.
Use a screwdriver to remove these screws and gently pull the old display away from the dashboard. Be careful not to force it out or damage any other parts of your vehicle.
👉 Tip: It is recommended to wear gloves during this step to avoid any potential injuries from sharp edges or broken glass.
Step 3: Install the new multifunction display
Take the new multifunction display and carefully align it with the dashboard. Attach it to the dashboard using the same screws you removed earlier, making sure to tighten them securely.
👉 Tip: It is recommended to test the new display before reattaching the trim panel to ensure it is working properly.
Step 4: Reattach the trim panel
Once the new display is securely attached to the dashboard, reattach the trim panel using the same screws or clips you removed earlier.
Make sure the trim panel is aligned correctly and securely attached to the dashboard.
Step 5: Test the new multifunction display
Turn on the ignition and test the new multifunction display to ensure it is working correctly. Check all functions of the display, including fuel levels, speed, and engine performance.
👉 Tip: It is recommended to clear any error codes or messages that may appear on the display after installation.
Frequently Asked Questions (FAQ)
Q: How much does it cost to replace a multifunction display in Subaru Forester 2015?
A: The cost of a new multifunction display can vary depending on the brand and model. However, you can expect to pay anywhere from $200 to $500 for a new display.
Q: Can I replace the multifunction display myself?
A: Yes, you can replace the multifunction display yourself as long as you have the right tools and knowledge. However, if you are not confident in your ability to complete the task, it is recommended to seek professional assistance.
Q: How long does it take to replace the multifunction display in Subaru Forester 2015?
A: The replacement process should take around 30 minutes to an hour, depending on your skill level and the tools you have available.
Final Thoughts
Changing the multifunction display in your Subaru Forester 2015 is a simple process that can be done with the right tools and knowledge. It is important to take precautions to avoid damaging the display or other parts of your vehicle during the replacement process. We hope this guide has been helpful and informative in assisting you in replacing your multifunction display.
