Joseph Weaver Are you wondering where the cabin filter is located in your 2015 Subaru Crosstrek? You’re in the right place! In this guide, we’ll show you the exact location of the cabin filter and provide you with all the necessary information to replace it.
Key Takeaways
- The cabin air filter in a 2015 Subaru Crosstrek is located behind the glove box.
- Replacing the cabin air filter should be done every 12,000 to 15,000 miles or once a year.
- A dirty cabin air filter can reduce the air flow in your vehicle, causing AC and heating systems to work harder and consume more fuel.
Tools Needed
Before we start, here are the tools you’ll need to replace the cabin filter in a 2015 Subaru Crosstrek:
- Phillips-head screwdriver
- New cabin air filter
Step-by-Step Guide
Now that you have your tools ready, let’s get started!
Step 1: Open the Glove Box
To access the cabin filter in your 2015 Subaru Crosstrek, you’ll first need to open the glove box.
Step 2: Remove the Glove Box Damper
Once the glove box is open, remove the glove box damper on the right-hand side by pressing the tab and pulling it off.
Step 3: Remove the Glove Box Stops
Next, remove the two glove box stops located on the left-hand side. These are held in place with Phillips-head screws.
Step 4: Remove the Glove Box
After removing the damper and stops, gently squeeze the sides of the glove box inward to release the retaining clips. Then, lower the glove box and remove it from the vehicle.
Step 5: Locate the Cabin Air Filter Housing
With the glove box removed, you’ll now be able to see the cabin air filter housing. It’s a black plastic box located behind where the glove box was.
Step 6: Open the Cabin Air Filter Housing
To open the cabin air filter housing, press the tabs on both sides of the housing and lift the cover off.
Step 7: Remove the Old Cabin Air Filter
Take out the old cabin air filter and dispose of it properly. If the filter is dirty or clogged, you’ll notice it’s gray or black in color.
Step 8: Install the New Cabin Air Filter
Insert the new cabin air filter into the housing with the airflow arrow pointing down.
Step 9: Replace the Cabin Air Filter Housing Cover
After installing the new cabin air filter, place the cover back on the housing and press down on the tabs until they click into place.
Step 10: Reinstall the Glove Box
With the new cabin air filter installed, it’s time to put the glove box back in place. Simply reverse the steps you took in removing the glove box, starting with raising the glove box back into position and squeezing the sides inward to re-engage the retaining clips.
Congratulations, you’ve successfully replaced the cabin air filter in your 2015 Subaru Crosstrek!
FAQs
Q: How often should I replace the cabin air filter in my 2015 Subaru Crosstrek?
A: It’s recommended to replace the cabin air filter every 12,000 to 15,000 miles or once a year, whichever comes first.
Q: What happens if I don’t replace the cabin air filter in my 2015 Subaru Crosstrek?
A: A dirty cabin air filter can reduce the air flow in your vehicle, causing AC and heating systems to work harder and consume more fuel.
Q: Can I reuse the old cabin air filter?
A: It’s not recommended to reuse the old cabin air filter. A dirty filter can cause reduced airflow and reduced effectiveness of your AC and heating systems.
Q: What type of cabin air filter should I use?
A: It’s recommended to use an OEM or high-quality replacement cabin air filter for the best results.
