Joseph Weaver If you own a 2013 Subaru Crosstrek, you may have experienced a tire pressure warning light on your dashboard. This light is an indicator that one or more of your tires has low pressure, which can be a safety hazard and reduce fuel efficiency. Fortunately, the tire pressure gauge on your Crosstrek can be reset quickly and easily. In this article, we will walk you through the steps to reset your tire pressure gauge.
Key Takeaways
- A tire pressure warning light on your dashboard indicates that one or more tires is low on pressure.
- Tire pressure can be affected by temperature changes, punctures, and leaks.
- The tire pressure gauge on your 2013 Subaru Crosstrek can be reset by following the steps below
- Always refer to your owner’s manual for specific instructions and recommended tire pressure levels.
Step-by-Step Guide to Resetting Tire Pressure Gauge on a 2013 Subaru Crosstrek
1. Check Tire Pressure Levels
Before resetting the tire pressure gauge, it’s essential to ensure that your tire pressure levels are correct. To do this, use a tire pressure gauge, which is available at most automotive stores or gas stations. Remove the valve cap from each tire, press the gauge onto the valve stem, and read the pressure level on the gauge.
2. Adjust Tire Pressure Levels
If any of your tires have low pressure, inflate them to the recommended levels. The recommended pressure levels are typically listed on a sticker inside the driver’s side door or in your owner’s manual. Use an air compressor or stop by your local gas station to inflate your tires to the recommended levels.
3. Turn on the Ignition
Once you’ve adjusted your tire pressure levels, turn on the ignition without starting the engine. This will activate your vehicle’s electrical system and allow you to reset the tire pressure gauge.
4. Press and Hold the TPMS Button
Locate the TPMS button, which is typically located on the dashboard or steering wheel. Press and hold the TPMS button until the light on your dashboard blinks twice.
5. Drive Your Vehicle
After resetting the tire pressure gauge, drive your vehicle for several miles to allow the system to recalibrate. This will ensure that the gauge is accurately measuring your tire pressure levels.
6. Check Tire Pressure Levels Again
After driving your vehicle, check your tire pressure levels again to ensure that they are still at the recommended levels. If any of your tires have low pressure, adjust them accordingly.
Conclusion
Resetting the tire pressure gauge on your 2013 Subaru Crosstrek is a simple process that can be completed in just a few minutes. By following the steps outlined above, you can ensure that your vehicle is running efficiently and safely. Remember to check your tire pressure levels regularly and always refer to your owner’s manual for specific instructions and recommended pressure levels.
FAQs
Q: How Often Should I Check My Tire Pressure Levels?
A: You should check your tire pressure levels at least once a month and before long trips.
Q: Why Does My Tire Pressure Gauge Keep Coming On?
A: Your tire pressure gauge may come on due to temperature changes, punctures, or leaks in your tires.
Q: What Is The Recommended Tire Pressure Level For A 2013 Subaru Crosstrek?
A: The recommended tire pressure level for a 2013 Subaru Crosstrek is typically 32 PSI for the front tires and 30 PSI for the rear tires, but always refer to your owner’s manual for specific instructions.
