Alton Brobst If you own a 2015 Subaru Crosstrek, you may be wondering where to find the wiper reserve. The wiper reserve is a vital component in your vehicle that stores windshield wiper fluid, which helps to keep your windshield clear and improve visibility while driving. In this article, we will walk you through the process of locating and refilling the wiper fluid reservoir in your Subaru Crosstrek.
What is a Wiper Reserve and Why is it Important?
The wiper reserve, also known as the wiper fluid reservoir, is a storage container for windshield wiper fluid. Windshield wiper fluid helps to clean your windshield while driving, especially during wet and snowy weather conditions. In addition, it improves your visibility by removing bugs, dirt, and grime from your windshield.
It is important to maintain your wiper reserve to ensure that you have enough wiper fluid when you need it. When your wiper fluid runs out, it can impair your vision and make driving unsafe. Thus, it is necessary to check and refill the wiper reservoir periodically.
Where is the Wiper Reserve Located in a 2015 Subaru Crosstrek?
The wiper fluid reservoir in a 2015 Subaru Crosstrek is located under the hood. To locate it:
-
Open the hood of your car and find the plastic cap labeled "washer" near the bottom of the engine bay.
-
Unscrew the cap counterclockwise to remove it.
-
You will now see the wiper fluid reservoir or the wiper reserve. It is a translucent container with a level indicator on the side.
How to Locate and Access the Wiper Reserve in a 2015 Subaru Crosstrek?
Locating and accessing the wiper reserve in a 2015 Subaru Crosstrek is a simple process. You will need the following items:
- Windshield wiper fluid
- Funnel
- Clean cloth/paper towel (optional)
Follow these steps to access the wiper reserve:
-
Locate the plastic cap labeled "washer" near the bottom of the engine bay and unscrew it counterclockwise.
-
Pour the windshield wiper fluid into the wiper reserve using a funnel. Be sure not to overfill the container beyond the maximum level.
-
Screw the washer cap back into place by turning it clockwise until it is snug, but do not overtighten.
-
Wipe any spilled fluid by using a clean cloth or paper towel, if needed.
How to Check and Refill the Wiper Fluid in the Reserve?
It is recommended to check and refill the wiper fluid in your Subaru Crosstrek regularly. Follow these steps:
-
Locate the wiper fluid reservoir under the hood, which is a translucent container with a level indicator on the side.
-
Check the level of wiper fluid in the reservoir. If it is below the minimum level, or not visible, it needs to be refilled.
-
Unscrew the washer cap counterclockwise and pour the windshield wiper fluid into the container through a funnel. Fill the container until the fluid level reaches the maximum mark.
-
After filling the wiper fluid reservoir, replace the washer cap tightly by turning it clockwise. Make sure the cap is snug, but not overtightened.
Frequently Asked Questions (FAQs)
Q. How often should I check the windshield wiper fluid level in my Subaru Crosstrek?
A. It is recommended to check the wiper fluid level at every oil change, which is every 5,000 to 7,500 miles.
Q. Can I use water instead of windshield wiper fluid?
A. While you can use water as a substitute for wiper fluid, it is not recommended. Water is less effective in cleaning your windshield and can freeze in cold weather.
Q. Can I mix different types of wiper fluid?
A. It is not recommended to mix different types of wiper fluid. Different fluids may contain different ingredients that can cause damage to your wiper fluid system.
Congratulations, you now know how to find and refill the wiper reserve in your 2015 Subaru Crosstrek. By keeping your wiper fluid levels topped up, you can ensure safe and clear visibility while driving, even in challenging weather conditions.
