Billy Covington If you’re a 2015 Subaru Crosstrek owner, you might need to change your headlight bulb at some point. Whether it’s because of a burnt-out bulb or you just want to upgrade to brighter, more efficient bulbs, changing headlight bulbs is essential to maintain safe driving at night. In this article, we will provide you with a comprehensive guide on how to change the headlight bulb in a 2015 Subaru Crosstrek.
Key Takeaways
- Before starting any work on your vehicle, make sure that the engine is turned off and that the car is in park.
- You will need to remove the headlight assembly to change the headlight bulb in your 2015 Subaru Crosstrek.
- The headlight assembly is held in place by several screws and clips, which must be removed before the assembly can be taken out.
- Be careful when handling the new headlight bulb and avoid touching the glass with your bare hands.
- When reinstalling the headlight assembly, make sure that all screws and clips are properly secured.
Tools and Materials Needed
Before starting, prepare the following tools and materials:
- New headlight bulb (make sure that it’s compatible with your 2015 Subaru Crosstrek)
- Screwdriver (Phillips-head and flathead)
- Gloves (to protect your hands from cuts and scratches)
- Clean cloth or towel
- Step stool or ladder (if needed)
Step-by-Step Guide
Follow these steps to change the headlight bulb in your 2015 Subaru Crosstrek:
Step 1: Turn off the engine and open the hood.
Make sure that the engine is turned off and that the car is in park. Then, open the hood of your vehicle and secure it in place with the hood prop.
Step 2: Locate the headlight assembly.
The headlight assembly is located at the front of the vehicle, on both the driver’s and passenger’s side. It’s a plastic cover that houses the headlight bulb and is secured by several screws and clips.
Step 3: Remove the headlight assembly.
Depending on your model, there may be several screws and clips holding the headlight assembly in place. Use your screwdriver to remove any screws and gently pry off the clips with a flathead screwdriver. Once all screws and clips are removed, gently pull the assembly out of the vehicle.
Step 4: Remove the old headlight bulb.
Locate the back of the headlight assembly and disconnect the headlight bulb’s electrical connector. Then, twist the bulb counterclockwise to remove it from the assembly. Be careful not to touch the glass with your bare hands, as this can cause the bulb to burn out prematurely.
Step 5: Install the new headlight bulb.
Use a clean cloth or towel to handle the new headlight bulb, then insert it into the assembly and twist it clockwise to lock it into place. Reconnect the electrical connector.
Step 6: Reinstall the headlight assembly.
Gently slide the headlight assembly back into place, making sure that all screws and clips are properly aligned. Reinstall any screws and clips that were removed in Step 3.
Step 7: Test the new headlight bulb.
Turn on your headlights to make sure that the new bulb is working correctly. If it’s not, double-check that the bulb is properly installed and the electrical connector is securely connected.
Step 8: Repeat for the other headlight.
If you’re changing both headlight bulbs, repeat Steps 2-7 for the other headlight.
Frequently Asked Questions (FAQ)
Q: What type of headlight bulb do I need for my 2015 Subaru Crosstrek?
A: The 2015 Subaru Crosstrek uses H11 headlight bulbs for both the low beam and high beam headlights.
Q: Can I change the headlight bulbs in my 2015 Subaru Crosstrek without removing the headlight assembly?
A: While it’s possible to change the headlight bulbs without removing the assembly, it’s not recommended due to the limited space and potential for damaging the surrounding components.
Q: How often should I change my headlight bulbs?
A: It’s recommended to change your headlight bulbs every two years or whenever they burn out. Regularly checking your headlights can help ensure that they’re working correctly and prevent any unexpected bulb failures.
Conclusion
Changing the headlight bulb in your 2015 Subaru Crosstrek is a relatively simple task that can be done in under an hour. By following this guide and taking the necessary precautions, you can ensure that your vehicle’s headlights are working correctly and safely. Remember to always use the appropriate tools and materials and double-check your work before hitting the road.
