Car enthusiasts and Subaru BRZ owners can agree that programming the key fob can be a daunting task. Luckily, programming a Subaru BRZ key fob is a straightforward process that anyone can do with the right tools. In this article, we’ll go over the step-by-step guide and troubleshooting tips to help you program your key fob in no time.
Step 1: Gather the Necessary Items
Before starting the programming process, ensure you have the following items:
- Subaru BRZ key fob
- Access to the car’s diagnostic port
- A computer with a diagnostic tool software
- Pin or paperclip
Step 2: Enter Programming Mode
- Insert the key into the car’s ignition and turn it to the "On" position without starting the engine.
- Locate the diagnostic port, situated under the dashboard on the driver’s side.
- Connect the computer to the car’s diagnostic port, insert the pin or paperclip into the OBD connector, and wait for the software to start.
- Select the "Programming" option from the diagnostic tool menu.
- Follow the prompts on the diagnostic tool screen to put the car in programming mode.
Step 3: Program the Key Fob
- Remove the key from the ignition and press any button on the key fob.
- Hold down the button until the car emits a beep sound.
- Repeat the process for each key fob you want to program.
- Once you are done, turn off the ignition, disconnect the diagnostic tool and close the diagnostic port.
- Test the key fobs to ensure they work with the car.
If the key fob does not work or you cannot enter programming mode, try the following:
- Ensure you have the correct software and drivers for your diagnostic tool.
- Check if the car’s battery is fully charged.
- Confirm that the diagnostic tool is compatible with your car’s computer.
- Ensure that the diagnostic tool is connected correctly to the diagnostic port.
If you still cannot enter programming mode, it’s better to seek the help of a professional mechanic or the dealership.
Do I need a professional to program my Subaru BRZ key fob?
- No, you can program your key fob by yourself using the correct tools and following the steps.
Can I program multiple key fobs at once?
- Yes, you can program multiple key fobs at once by repeating the programming steps for each key fob.
Do I need to have all the key fobs present when programming them?
- No, you can program each key fob separately at different times.
What if my key fob still doesn’t work after programming it?
- Try the troubleshooting tips mentioned above, and if they don’t work, it’s best to seek professional help.
In conclusion, programming a Subaru BRZ key fob is a simple process that can be done on your own with the right tools and software. Follow the step-by-step guide and troubleshooting tips mentioned above, and you’ll be on your way to unlocking the secrets of the Subaru BRZ’s key fob programming in no time.